JOYO JF-09 TREMOLO GUITAR EFFECT PEDAL

Battery Replacement:
1. Press the front of the battery cover and then slide backwards to remove the cover. Remove the flat battery.
2. Put the new battery into the battery compartment by placing the negative (-) polr of the battery facing inside. Insert the front cover, press down and push in to close.
*To prolong the life of the battery, be sure to disconnect the plug from the jack when not using the unit.
*Replace the battery if the LED is dim or off during the effect ON mode.

How to use:
A. To get the pedal ready, link the connector wire (not included in purchase)
B. INTENSITY: To adjust the mixing ratio of delaying signal and the original signal
C. RATE: To control and adjust the speed
D. LED: To indicate the power statement
E. ADAPTOR: When you use an adaptor, the battery inside the device will stop working automatically.

Specifications:
Input Impedance 1MOhms
Output Impedance: 1 KOhms
Running Current: 7 mA
Speed Range: 1Hz - 20 Hz
Power: 6F22 9V Battery / DC 9V Adaptor
Dimension: 120 (L) x 72 (W) x 55 (H) mm
Weight: Approximately 280g

Items included per purchase:
1 x JOYO JF-09 TREMOLO Pedal (Yellow)