Bicycle Acessories
★Free Non-registered Mail Shipping ★
Top up SGD3 for registered mail
★Pricing: SGD$19.90 Now: SGD15 (limited time)
Cateye Enduring Classic Velo7 Cycling Computer
CATEYE VELO 7 Menu
Function 1: riding time (Tm) can be cleared
Function 2: riding distance (Dst) can be cleared
Function 3: Average Speed (Av) can be cleared
Function 4: Maximum speed (Mx) can be cleared
Function 5: Total Distance (Odo)
Function 6: Clock
The upper part of the screen is the real-time speed , the lower left part of the function symbol (Tm Dst Av Mx ....., the lower right part for functional data .
Press the MODE key to switch between the various functions
Setting method:
INITIALIZATION:
- Press MODE key and press the SET button simultaneously, the stopwatch records will be empty. After replacing the battery, please do the initialization. Otherwise, the screen will be blank.
- After initialization, the screen flashes "Km/h", press MODE key to switch to "mph". Press the SET button to select.
- Determined wheelsize, the screen flashes "205", is the default 26 mountain bike wheel size. Refer to below table to set the wheelsize. Press the SET button to select.
Wheel circumference table:
16 × 1.75 120
18 × 1.75 135
20 × 1-3/8 162
22 × 1-3/8 177
24 × 1.75 189
26 × 7/8 192
26 × 1.25 195
26 × 1-1/8 190
26 × 1-3/8 207
26 × 1-1/2 210
26 × 1.40 200
26 × 1.50 201
26 × 1.75 202
26 × 1.95 205
26 × 2.00 206
26 × 2.10 207
26 × 2.125 207
26 × 2.35 208
27 × 1 215
27 × 1-1/8 216
27 × 1-1/4 216
27 × 1-3/8 217
650 × 35A 209
650 × 38A 212
650 × 38B 211
700 × 19C 208
700 × 20C 209
700 × 23C 210
700 × 25C 211
700C Tubular 213
Setting the clock:
In CLOCK mode , press the SET button at the back. Hour digit will flash, press the MODE button to adjust, then press the SET button to select. Then, Quintile will flash, press the MODE button to adjust, then press the SET button to complete the clock setting.
Resetting the records:
Long press the MODE key, you can empty the other records except ODO total mileage riding outside . Which the clock is not clear .
Idle for a long time ( over 30 minutes with no input ) automatically enter power-saving state. The battery and computer motherboard battery , are CR2032, you can use for 2-3 years.
Note: When installing the magnet and the sensor, the sensor head needs to be aligned with the center of the magnet (note the sensor head , not the sensor as a whole ) , the gap is about 3MM. If no data, adjust the magnet and sensor location.
Contact me at nine326042nine if you have questions
