1 pcs All-in-1 Component Tester Transistor Diode Capacitance ESR Meter Inductance
Description::
This tester can measure transistor， MOSFET， diode， resistor， capacitor， inductor and also the ESR of the capacitor
One tester save all measuring solutions
This version is mini LCD， if you need a larger LCD， it is HERE， the spec is the same
1，2014 latest M328 version of the software ，more functions.Chip: Atmega328
2.128*64 big Backlight LCD display，only 2mA when stand by.
NEW Function:
Automatic detection of NPN and PNP transistors， n-channel and p-channel MOSFET， diode (including double diode)， thyristor， transistor， resistor and capacitor and other components
2: Automatic test the pin of a component， and display on the LCD
Can detect the transistor， MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
4: Measure the gate and gate capacitance of the MOSFET threshold voltage
5:Use 12864 liquid crystal display with green backlight
Size:140*90*55MM
Specifications: For you reference
1，One -button operation， automatic shutdown .
2，Only 20nA shutdown current.
4，Automatic identification components pin arrangement .
5，Measuring bipolar transistor current amplification factor and base - emitter threshold voltage.
6，Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.
7，Can detect bipolar transistors and MOS transistors protection diodes.
8，Measuring the gate MOS FET threshold voltage and the gate capacitance.
10，Resistance measurement resolution is 0.1 ohms ， 50M ohms can be measured .
13，Can be in the correct order and the diode symbol display two diodes ， and gives the diode forward voltage.
15，Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.
18 can be obtained with a single measurement rectifier bridge connection.
Notice: Before measuring capacitance ， the capacitor must be discharged ， otherwise very likely damage the meter .
';