Studio : Jablotron Publisher : Jablotron Binding : Baby Product Product Description PREVENTING SIDS
The European NANNY Baby Movement Monitor - EU Medical device SIDS Baby forget to breathe properly while sleeping .Nanny is a registered CE medical device by the European Union authority and complies with part 15 of the FCC rules, and with CP(Consumer
Product Safety Improvement Act)
Mother. This is the only device that has been selected for use in hospitals and households. If no movement is detected after 20 seconds, the Nanny will trigger a loud acoustic and visual alarm. It will also raise an alarm if the baby breathes only 8 times in one minute. The first situation will alert the parents. The second will also awake the baby. The Nanny Baby Movement Monitor is designed to continuously monitor the baby slightest movements. If no movement is detected after 20 seconds, the Nanny will trigger a loud acoustic and visual alarm. It also emits an alarm if baby breathing rate drops to below 8 breaths per minute. The first situation will alert the parents, the second will also awake the baby. Therefore, this device offers additional protection from apnea, when babies sometimes forget to breathe properly while sleeping.It's passively sensing thebaby movements and does not generate any form of radiation.It has no harmful effect on the baby whats oever.The control unit is battery operated. NO risk of electrical hazards .The sensor pad is positioned underneath the crib's mattress and detects the smallest chest movements of the baby. It transmits signals to the control unit, which indicates normal breathing and movements by signaling a bright green flashing light. If no movement is detected, the Nanny monitor will emit warning beeps for 5 seconds and then it will emit a loud alarm sound, while the red indicator flashes.To stop the alarm you should switch OFF the control unit.If there is no beep sound after turning the uniton, and the battery red indicator flashing,batteries need to be replaced
Increase area connect 2pads to same control 0
|