Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant etc
Size: AN8; Length: 5 Feet (60 Inch)
Inner Diameter: 0.44'' / 11.12mm. Outside Diameter: 0.64'' / 16.28mm
Working Pressure: 1000 PSI / 69 Bar; Burst Pressure: 5000 PSI / 350 Bar
Operating temperature: -40 Degree F to +350 Degree F

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 7.5 inch
Height : 1.5 inch
Length : 9 inch

Item Weight: 10.08 ounce (View shipping rates and policies)
Shipping Weight: 11.2 ounce (View shipping rates and policies)

ASIN : B00V9AAILG

Product Description

This hose is made to resist extreme heat, abrasion and corrosion. It offers superior flexibility & bending with maximum vacuum service.
Material:
* Inner hose: CPE synthetic rubber.
* The middle layer: 304 stainless steel wire mesh sleeve.
* The outer layer: 304 stainless steel wire.
How to Cut:
For cutting your new steel braided hose to length you will need:
* cutting wheel/ hack saw/ or steel braided hose cutters
* duct tape or electrical tape (work best)
1. Measure your hose and find desired length.
2. Tape hose at measured length needed for application.
3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)
4. Remove the tape.
5. Slide one end of hose into end of fitting.
6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7. Make sure all connection are tight.