Features:
1. Grinding process appearance, refined and easy to clean; low-power radiation, energy saving and environmental protection;
2. 300Mbps wireless transmission rate; 2 * 5dBi external omni-directional antenna, wide coverage;
3. Good compatibility, compatible with the mainstream market routers and wireless LAN;
4.1 10 / 100Mbps Ethernet port can be used for the relevant extension;
5. Support WPS a key configuration; supports two-dimensional code scanning quick setup; RST button to restore the factory default settings;
6. Status Indicator can intuitively understand the state of equipment; PC side supports AP / Relay / Route mode;
7. Meet IEEE802.11b / g / n standards;

Product parameters:
Hardware Specifications: RTL8196EU + RTL8192ER chip solution
Antenna Specifications: 2 * 5dBi external omni-directional high-gain antenna (not removable)
Wireless Standard: Support IEEE802.11b / g / n standards;
Wireless transmission rate: 11b: 1/2 / 5.5 / 11Mbps
11g: 6/9/12/18/24/36/48 / 54Mbps
11n: 300Mbps
RF parameters:
Maximum transmit power: 50mW (17dBm)
Maximum receiver sensitivity: -96dBm
Operating frequency: 2.4 ~ 2.4835GHz
Button: a WPS / RST button
Physical interface: a 10 / 100Mbps LAN / WAN RJ45 Ethernet port
LED: power status, interface status, WiFi Status
Power supply: 100 ~ 240V, 50 / 60Hz
Channel bandwidth: 20/40 MHz Auto
Security features: WPA-PSK / WPA2-PSK
WPA / WPA2
Operating modes: relay mode (PC side: AP / repeater / router)
Other: a key settings, scan code set (mobile terminal, PC terminal double WEB interface)
Shell: imported ABS material, plastic shell
Physical Characteristics: Dimensions: 217 * 58 * 24mm
Environment: Operating Temperature: 0 ~ 40
Storage temperature: -40 ~ 70
Humidity: 10% ~ 90% RH non-condensing
Storage humidity: 5% ~ 90% RH non-condensing

Package includes:
1 * CF-WR302S relay
1 * cable
1 * Quick Installation Guide