Instructions for use:

A， when charging， the power switch button position closing the lamp， thelamp power line with two holes one head is completely inserted into thetable AC socket， will end with plugs directly into the AC90-240V power outlet， the corresponding charge indicator light， said lamp in a state of charge， sufficient electricity for about 8 hours.

B， before using the product， turn the power switch white button position，can use the button control function， if not used for a long time， please put the power under the two white button position.

C， when the power is turned on， the lamp is off state， white button switch，the light brightness according to brightness， under the two rear microbrightness， press the three out， followed by cycle.

D， sufficient power， 14 LED lights the maximum brightness of lighting can be used continuously for about 5 hours.

E， in use process， when the LED lamp dimming， tends to completely discharge the battery state， this time for the protection of the battery，should stop use and must be timely charging， (not just charging， in LED lighting without light when the battery easily damage the battery).

3) security matters:

A. power and socket should conform to the safety regulations.

Do not use the B. product charge， to avoid burning the LED bulb orparts.

C. lamp head not to direct light eyes， so as not to affect the vision.(children must be instructed by adults)

D. do not let the rain or wet.

E. every time away from flammable materials when charging， the charging time of the long time not exceeding 24 hours. (recommended charging during the daytime)