Item Descriptions:

Style name:

body

Product introduction

Developed in-house, with approximately 10.1 megapixel CMOS sensor.

High-speed continuous shooting of about 6.5 frames / sec is possible.

A new image engine, high-definition, high-speed processing, equipped with DIGIC III.

From Amazon

Approximately 10.1 megapixel CMOS sensor and high performance video engine "DIGIC III" are installed

Newly developed 10.1 megapixel CMOS sensor

A self-developed large-scale CMOS sensor (22.2 × 14.8 mm: APS - C size) with about 10.1 million effective pixels (total pixel number about 10.5 million pixels) is installed.

By improving on-chip microlens, light condensing efficiency has been improved, and compared with "EOS 30 D", while setting pixel size smaller, set ISO range of 100 to 1600 for commonly used setting.

Since ISO 3200 can also be selected by ISO sensitivity expansion, it is possible to correspond to a wider range of subjects.

Moreover, by installing the 2nd generation on-chip noise elimination circuit, by executing thorough random noise reduction and fixed pattern noise elimination, low noise is realized also at high ISO sensitivity · long-time shooting.

Furthermore, the range of the ISO sensitivity automatic setting in the simple shooting zone, such as full automatic mode and portrait mode, is expanded by one stage to the high luminance side from 100 to 800, and the shutter priority AE, aperture priority AE

Automatic setting of ISO sensitivity also enabled in the applied shooting zone.

In the automatic setting, the sensitivity setting according to the shooting mode is performed, such as automatically setting the ISO sensitivity so that the shutter speed is hard to shake depending on the brightness.

High performance video engine "DIGIC III"

The high-performance image engine "DIGIC Ⅲ" equipped with the ability to process enormous image data at high speed and advancedly is adopted, realizing both high-definition digital image processing and high-speed continuous shooting.

Moreover, processing that converts the analog signal output from the CMOS sensor to the digital signal is improved from 12 bits (4,096 tones) of the conventional model to 14 bits (16,384 tones), enabling natural and rich gradation expression

became.

Furthermore, it is possible to set each noise reduction function by custom function, which reduces the noise generated during long-time shooting and high ISO sensitivity shooting.

Up to about 6.5 frames / sec · Continuous shooting of about 75 pictures

Due to the 4-channel high-speed signal reading from the CMOS sensor, the high-speed image processing of "DIGIC Ⅲ", the adoption of the 2-motor system, the maximum continuous shooting performance of "EOS 40D" of up to about 6.5 frames /

It is improving.

It is also possible to switch between "high-speed continuous shooting" of up to about 6.5 frames per second and "low-speed continuous shooting" of up to about 3 frames / sec according to shooting applications.

The number of consecutively shootable images has improved from about 30 to about 75 JPEG (Large / Fine) images, from about 11 images to about 17 images * 2 in RAW images, due to improved development processing sequence.

* 1 Depends on shooting conditions.

* 2 Canon test standard CF card use, high speed continuous shooting.

9 point AF which performs high precision cross distance measurement at all points

A cross distance measuring sensor capable of detecting the vertical and horizontal lines of the subject was placed at all the 9 distance measuring points.

Highly accurate detection can be performed, realizing excellent focusing with few subjects weak.

At the center distance measuring point, for the first time in the EOS series, sensors capable of detecting vertical and horizontal lines corresponding to F 2.8 are arranged, enabling more accurate focusing.

Also equipped with a large defocus sensor capable of high-speed focusing even from out of focus condition.

New high-performance finder with magnification of about 0.95 times

A new design finder with a viewfinder magnification of about 0.95 times (viewing angle 26.4 °) and a field of view ratio of 95% is installed.

The eye point has also been expanded to 22 mm, greatly improving the visibility.

Further improvement of reliability

EOS Integrated Cleaning System comprehensive sensor dust countermeasure of EOS DIGITAL

"EOS Integrated Cleaning System (EOS I.C.S.)" is a collective term for Canon's comprehensive approach to sensor dust specific to digital single lens reflex cameras.

Attention was paid to a series of processes such as generation of dust, adhesion, removal, and various measures were taken.

High speed shutter with operation durability about 100,000 times · maximum about 1/8000 second

A high performance shutter unit with a maximum of about 1/8000 seconds · flash sync speed of 1 / 250s is installed.

It performs exposure control from 1/8000 sec to 30 sec and clears the operation durability test about 100 thousand, ensuring high reliability.

High rigidity by magnesium alloy exterior

Magnesium alloy is adopted as the main exterior cover.

Body finish with high rigidity while directing high quality black satin-like satin finish painting and canon logo on the front of the main body with imprinted type letters etc., producing a high-class image.

Improvement of dustproof / drip-proof performance

Dustproof / drip-proof performance is improved by sealing the CF card slot cover and the battery chamber lid.

Improve information display and operability

3.0 type large LCD monitor with improved visibility

3.0 type · Equipped with a liquid crystal monitor with approximately 230,000 pixels.

Easier viewing of the characters on the menu display, improved viewability with a wide viewing angle.

In addition, by improving the maximum brightness, it is also effective for use in bright outdoors.

Furthermore, enlarging the color reproduction area realizes more natural image display.

Fulfilling finder information display

Added ISO sensitivity to information display in the viewfinder.

Even in the case of automatic setting, the ISO value is displayed.

In addition to the "B / W" display lighting up in monochrome shooting, we improved the number of consecutive shootable images from the conventional one digit display to the two digit display and shoot while grasping the remaining number of shootable images more accurately

It became possible to do.

Shooting function setting with LCD monitor

Settings such as shutter speed and aperture value can now be performed while checking with a 3.0-inch large LCD monitor.

It is convenient when you can not see the viewfinder or the top display panel, such as shooting from a high position with a tripod.

Live view shooting function expanding shooting style

Live view shooting function

The live view shooting function which can shoot real time video from CMOS sensor while checking with the LCD monitor of the camera is installed.

While watching real-time video, you can perform framing, focusing, exposure confirmation and shooting.

It demonstrates its power in macro shooting using a tripod.

In live view shooting, display with a viewing field ratio of about 100% can be performed.

It is also possible to perform accurate focusing by enlarging by 5 times / 10 times.

Various displays such as display of grid lines that can check horizontal and vertical inclination and display with brightness according to exposure setting such as shutter speed and aperture are possible.

By using "EOS Utility" of the attached software, remote live view shooting can also be performed while confirming the composition and focus of the subject in real time on the display of the personal computer.

Silent shooting mode

When shooting live view, it is set to a mode that suppresses the operation sound, compared to normal shooting, so it is effective for shooting scenes where you want to suppress sounds, such as concerts and stage shooting.

It is also possible to set the mode to minimize the operating sound at the moment of shooting without shutter charge until you release the shutter button.

AF function during Live View shooting

Added the AF function during Live View shooting to the custom function.

By pushing the AF - ON button during live view shooting, live view shooting is temporarily interrupted and AF is performed.

Compatible with a variety of shooting styles

Replaceable focusing screen

In addition to the standard focusing screen, two types of focusing screens are available as options.

The grid type "Ef - D" is convenient for determining the composition such as confirming the subject's horizontal and vertical.

"Ef-S" which makes it easy to grasp the focus is effective by manual focusing when using a lens whose open F value is brighter than 2.8.

My Menu Function

With My Menu function that allows you to quickly call frequently used functions without having to search from menus and custom functions each time.

To My Menu, you can register up to six frequently used items.

It is also possible to set so that the My Menu screen is displayed first when the menu button is pressed.

Camera user setting function

Up to three types of shooting functions and menu contents set in the camera can be registered in the camera body.

Convenient when you want to set camera settings for each shooting condition.

Small RAW

Small RAW was added to the image type.

About 1/4 pixels of RAW image and about half of the file size, easy to handle, inherited the degree of freedom of image adjustment which is the feature of RAW image.

High brightness side · Tone priority function

Added "New highlight side / gradation priority" function to the custom function which extends the dynamic range on the high brightness side by about 1 stage.

Improvement of the gradation expression of bright parts in the image, it is possible to suppress white spots.

Equipped with AF-ON button

Newly set up where you can press the AF - ON button with your right thumb.

Pressing the AF - ON button activates the AF, and you can fix the exposure by pressing the shutter button halfway.

It is convenient when you want to perform focusing and exposure determination separately.

Reduced release time lag

The release time lag when the shutter button is fully pressed from the half pressed state realizes 59 ms approaching the professional machine, and it has a high response performance that is strong against the shutter opportunity.

2 seconds self timer

Two seconds self-timer function to shoot 2 seconds after pressing the shutter button.

Effective when you want to prevent camera shake, such as close-up shooting.

k Picture Style Support

"Picture Style" which easily realizes a variety of photograph expressions is installed according to the user's drawing intention.

Picture style selection buttons are arranged independently in the lower part of the LCD monitor, so that it seems like choosing a film, from "standard" "portrait" "landscape" "neutral" "faithful setting" "monochrome", photograph expression and purpose

You can choose the most suitable style according to.

Compatible with all EF lenses including EF - S lens

From ultra-wide angle to super telephoto and even special lenses, it is possible to use all over 50 types of EF lenses.

Adopting a mechanical structure that reduces the diameter of the image circle, it can also use EF - S lens optimum for sensor size (APS - C size) of "EOS 40D".

* When the EF lens group including the EF - S lens is attached, the shooting angle of view is equivalent to about 1.6 times the focal length of the lens notation.

Advanced system accessories

Cooperation with external strobe

Using "Speedlight 580EX II" allows you to set the speedlight function and strobe custom function while watching the "EOS 40D" menu screen, greatly improving operability.

Battery grip

Battery grip "BG - E 2 N" was newly prepared as an option.

Dust-proof and drip-proof performance are improved by applying sealing to the lid of the battery chamber.

Highly verify originalness of recorded images

Corresponds to the original data security kit "OSK-E3".

By adding the original image determination data to the captured image, it is possible to verify the originalness of the image data.

"EOS DIGITAL Solution Disk" containing various application software

CD-ROM "EOS DIGITAL Solution Disk 15" containing various application software is included.

RAW image browsing / editing software "Digital Photo Professional" with high-speed development and high-speed image editing function that can respond to professional needs

Features:

• Please enter model number Confirm this is compatible:
• ● EOS 40D Black ● Body

Product information:

Shipping Weight: 1850 g

Package Dimensions: 13.79 x 18.49 x 24.51 cm