Adafruit PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+
</br></br>
<div style="text-align:left">
<b>[Product Information]</b><br>
<ul>
<li>Synchronous operation means you can disconnect the output completely by connecting the ENable pin to ground. This will completely turn off the output</li>
<li>4A internal switch means you can get 1000mA+ from as low as 1.8V, 1500mA+ from 2 NiMH or Alkaline batteries, and at least 2000mA from a 3.7V LiPoly/LiIon battery or 3 NiMH/Alkalines. Just make sure your batteries can actually supply the required 2-4A, OK?</li>
<li>Low battery indicator LED lights up red when the voltage dips below 3.2V, optimized for the most common usage of LiPo/LiIon battery usage</li>
<li>On-board 1000mA charge-rate 'Apple/iOS' data resistors. Solder in the included USB connector and you can plug in any iPhone or iPod for a speedy 1000mA charge rate. Works with iPads, both mini and 'classic' type.</li>
<li>Full breakout for battery in, control pins and power out 90%+ operating efficiency in most cases (see datasheet for efficiency graphs), and low quiescent current: 5mA when enabled and power LED is on, 20uA when disabled (power and low batt LED are off)</li>
</ul>
</div>
</br></br></br></br></br></br></br></br></br></br>

</br></br></br></br></br></br></br></br></br></br>
<img src='//agdetail.image-gmkt.com/m430/543/833/840833543/img/agdetail.image-gmkt.com/543/833/840833543/img/ecx.images-amazon.com/images/I/51hIrM2jYAL.jpg'></br>