APPLICATION Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Prior to use, slide off the red safety clip from the trigger. Shake often during use. Hold can upright 8-12” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply three or more light coats continuously, spraying of the surface with each coat. For best results, apply multiple light coats versus one heavy coat. Do not use near open flame.
DRY & RECOAT Dry and recoat times are based on 70ºF and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 30 minutes, to handle in 1 hour, and is fully dry in 24 hours. Apply additional coats any time, but for best results, wait 5 minutes between coats. Note: For 302153, apply two or more medium coats continuously, spraying off the surface with each coat.
CLEAN-UP When finished spraying, wipe off tip before storing. Clean up wet paint with xylene or mineral spirits. Dispose of empty can in recycle pickup. Do not burn or place in home trash compactor.
Rust-Oleum® Universal® is a paint and primer in one that provides superior coverage and durability over any surface – it also features a patented comfort trigger that eliminates finger fatigue and sprays from any angle.
IDEAL USE
METAL
WICKER
CONCRETE
WOOD
VINYL
LAMINATE
PLASTIC
GLASS
FOR BEST RESULTS
If applying over a Universal finish, be sure to recoat within an hour or after 48 hours. The more coats applied, the more the effect will appear.
ABOUT CLEAR TOPCOAT
Give your projects new life with a unique finish. Rust-Oleum® Universal® Clear Spray Paint can be applied on any surface and at any angle—with the unmatched comfort of our patented trigger technology. It comes in unique finishes to give any project a one-of-a kind look.
Rust-Oleum Universal 11 oz. Clear Dead Flat Spray is the highest quality most durable clear. Designed for diverse substrates, it works on virtually any surface: vinyl, metal, plastic, fiberglass, concrete, glass, wicker and wood. Universal is suitable for interior or exterior environments. Oil based formula covers up to 35 sq. ft. protects surfaces from rust and dries to the touch in as little as 30 minutes. A specially designed nozzle eliminates finger fatigue, protects against dripping and sprays from any-angle, even upside down.
Unique finishes and effects
Ultimate UV protection
Flexible for extreme applications
Fade and chip resistant
Apply over any surface or Universal paint
Interior/exterior use, designed for diverse substrates and works on virtually any surface: vinyl, metal, plastic, fiberglass, concrete, glass, wicker and wood
Covers up to 10 sq. ft.
Crystal clear finish provides an ultra-flat non-reflective appearance that hides surface imperfections
Provides protection from the elements and maximum UV protection for a long lasting finish with minimal maintenance
Ergonomic cap eliminates finger fatigue and offers 360°, any-angle spray technology
Dries to the touch in 30 minutes
Recoat within 1 hour or after 48 hours
Oil-based formula with excellent adhesion protects from rust, resists fading and chipping
APPLICATION 
