Arbitrary waveform DDS signal generator from this series is a multi-functional signal generator with high precision and high performance. It adopts large scale of FPGA integrated circuits， high-speed MCU microprocessor and with high precision oscillator as base in the inner circuit， which make the signals more stable. SMT process can greatly improve the anti-interference and lifetime of the instrument. It has entirely independent dual-channel DDS signal and TTL level output， can generate signals of sine/triangle/square/sawtooth/pulse wave， white noise， etc. This instrument is of great advantage in generating signal， scanning waveform， measuring parameters， etc. It's an ideal testing or measuring instrument for electronics engineer， electronic laboratory， teaching and researching. 

Features:
Adopts DDS direct digital synthesis technology， can generate precise， stable output signals with higher distortion.
With high quality aluminium alloy shell， and powered by DC 5V， convenient and portable for use. 
Can output arbitrary waveform and conventional function waveform(sine/triangle/square/sawtooth wave signal).
All functions are digitally controlled， precise and stable.
2.4"(320*240)color display， simultaneously display dual-channel waveform parameters.
The highest output frequency(sine wave) is up to 25MHz， 200MSa/s sampling rate and 12 bits vertical resolution.
Completely independent dual-channel output， can work in sync， phase difference is adjustable.
With channel tracking function: when the tracking function is open， the all parameters of both of channel can simultaneously update according to user's configuration.
Two or more machines can realize multi-machine synchronous function with TTL_IO interface.
15 groups of arbitrary wave storage location， the memory depth/group is 2048*12bits.
High frequency resolution(total range frequency resolution is 1uHz) and high amplitude resolution(Min. is 1mV).
The duty ratio of each channel can be adjusted independently， adjustment resolution can reach 0.01%.
Can scan frequency， amplitude， bias and d uty cycle， with linear sweep and logarithmic frequency sweep modes(Max. up to 999.99s).
With pulse train trigger function， three optional trigger modes: manual trigger， inner CH2 trigger and external trigger.
Has a frequency measurement， period measurement， positive and negative pulse width measurement， duty cycle measurements and counting function.

Specifications:

Frequency Parameters
Frequency Range	Sine Wave	Normal Modes(Optional): 0Hz~2MHz / 0Hz~6MHz / 0Hz~12MHz / 0Hz~15MHz / 0Hz~20MHz / 0Hz~25MHz
	Square Wave	0Hz~6MHz (Except the 2MHz Model)
	Triangle Wave	0Hz~6MHz (Except the 2MHz Model)
	Sawtooth Wave	0Hz~6MHz (Except the 2MHz Model)
	Arbitrary Waveform	0Hz~6MHz (Except the 2MHz Model)
	TTL Digital Signal Wave	0Hz~6MHz (Except the 2MHz Model)
The Min. Frequency Resolution	1μHz(0.000001Hz)
Frequency Error	(+/-)5*10^(-6)
Frequency Stability	(+/-)1*10^(-6)/3 Hours
Phase Adjustment Range	0~359°
Phase Resolution	1°
Waveform Parameters
Waveform Types	Sine/Triangle/Square/Lifting Sawtooth Wave， Lorentz Pulse Wave and Arbitrary Waveform， etc.
Waveform Length	2048Points
Sampling Rate	200MSa/s
Vertical Resolution	12 Bits
Sine Wave	Harmonic Arrived System	≥45dBc(!#!lt!*!1MHz); ≥40dBc(1MHz~20MHz)
	Distortion	!#!lt!*!0.8%(20Hz~20KHz， 0dBm)
Square Wave	Lifting Along Time	≤20ns
	Overshoot	≤0.5%
	Duty Cycle Adjustment Range	0%~99.9%
Sawtooth Wave	Linearity	≥98% (0.01Hz~10KHz)
Pulse Wave	Pulse Width Adjusting Range	10nS~1S
TTL Output	Level Rise/Down Time	≤20ns
	Level Amplitude	!#!gt!*!0.3Vpp
	Fan-out	!#!gt!*!20 TTL Load
CMOS Output	Low Level	!#!lt!*!0.3V
	High Level	1V~10V
	Level Rise/Down Time	≤20ns
Output Parameters
Amplitude Range(Peak to Peak)	10mVpp~20Vpp
Amplitude Resolution	1mVp-p (-20dB Attenuation)
Amplitude Stability	(+/-)0.5%/5 Hours
Amplitude Flatness	(+/-)5%(!#!lt!*!10MHz); (+/-)10%(!#!gt!*!10MHz)
Waveform Output
Output Impedance	50Ω(+/-10%) (Typical)
Protection	All signals output can work above 60s under the condition of load short circuit
DC Bias
Bias Adjustment Range	(+/-)10V
Bias Resolution	0.01V
External Measurements
Frequency Measuring Range	GATE-TIME=1S 1Hz - 60MHz
Input Voltage Range	0.7Vpp~20Vpp
Counting Range	0~4294967295
Counting	Manually
Periodic Measurement	20ns Resolution， the Max. Measurable 40s
Scanning Function
Scan Mode	Linear Sweep， Log Sweep
Scan Object	Frequency， Amplitude， Bias and Duty Cycle
Scan Time	0.01s-999.99S/Step
Frequency Setting Range	Start Point and End Point can be set freely
Frequency Scan Range	It is determined by the sweep parameter settings
General Parameters
Memory	Quantity	20
	Location	M0~M19
Interface	Interface Mode	Using USB to Serial Interface
	Communication Rate	9600bps
	Protocol	Using the Command Line， the Agreement Public
Power Supply	Voltage Range	DC 5V (+/-0.5V)
Display	Display Type	2.4" TFT Color Display
Environment	Temperature: 0~40°C	Humidity: !#!lt!*!80%
Size	140 * 95 * 54.2mm / 5.51 * 3.74 * 2.13in (L * W * H)
Weight	419g / 14.8oz
Package Size	22.5 * 15 * 7.5cm / 8.86 * 5.9 * 2.95in (L * W * H)
Package Weight	700g / 24.7oz

Package List:
1 * Signal Source Generator
1 * USB Cable
1 * Power Adapter
1 * CD                    
2 * BNC Clips Cable