Product Description

3in1. has been developed to execute several determinations from fingertip simply by changing strip.

3in1. is a new system dedicated to glucose, cholesterol and triglycerides monitoring in the blood.

3in1. system is using two different technologies:
 

• AMPEROMETRIC with 3in1.glucose ELECTRODES strips,
• REFLECTOMETRIC with 3in1. cholesterol and triglycerides strips.

Technical Feature

• Automatic detection against necessary sample volume with aspiration of blood drop
• Auto Switch ON by strip insertion
• Strip Ejector switch
• Memory capacity of 500 measured values with time and date
• Measurement range:
  0.6 - 33.3 mmol/l glucose ELECTRODES
  3.3 - 10.2 mmol/l cholesterol
  0.56 - 5.6 mmol/l triglycerides
• Power source with 2x3V lithium button cell, type CR2032. Approx. 1000 measurements
• Dimensions:
  97 mm x 49 mm x 20.5 mm
• Weight: 65 g (incl. battery)

How to perform test...

INSERT THE DATA-CHIP

It is necessary to insert the datachip contained in the strips box in
order to automatically download all required information to perform the test.

INSERT THE DATA-CHIP

On the display will appear the data-chip number that should correspond to the one printed in the strip vial label.

INSERT THE STRIP

Insert the reagent strip of the parameter that you would perform.
The instrument will automatically switch on.

BLOOD ASPIRATION

After performing the finger prick let the blood be aspirated or apply (for Triglycerides and Cholesterol) the drop of blood.
The required volume is small.

CHECK THE RESULT

Check the result that appears on the display after short time.
The wide characters will help the operator to execute the test and to clearly read the results.

EJECTION OF USED STRIPS

After performing the test it is possible to eject automatically the strip by pressing the ejector switch, on the backside of the instrument in order to avoid contamination.