7008

Brite Galvanize Coating

65% Zinc Rich
Aerosol Spray Can (402ml)

Description:
Crown's premium Brite Galvanize Coating 65% Zinc Rich is a restorative coating fortified with zinc for preventing rust and corrosion on ferrous metal surfaces. Both aerosol and bulk use metallic zinc flake that is 97% pure. The bright zinc coating will restore galvanized steel to the bright look of hot dip with 65% zinc in the dry film which meets ASTM A780 standards.

Benefits:
Product provides good durability and salt spray resistance without containing lead chromates, methylene chloride or fluorocarbons. Galvanic protection is consistent with zinc content. Excellent hide and blending abilities.

Application:
Use on damaged galvanized surfaces, structural steel, automobiles, chain link fences, guard rails, hand rails, bridges, TV and radio towers, heat ducts, welded joints, storage tanks, signs and sign posts, equipment (farming, mining and construction, power plant, railroad, offshore, etc.), gutters, pipelines, transformers, corrugated metal buildings and anywhere the bright look of hot-dipped surfaces is desired. Ideal for industrial type application, (e.g., aviation, marine, manufacturing, petroleum).

Directions:
Whenever possible, repair should be applied within two hours of the damage to the galvanized surface; this prevents oxidation of the exposed areas. Surface should be free of dirt, dust, oil, grease, old paint, heavy mill scale, loose rust particles, and any other contaminants that could prevent proper adhesion. Severely rusted areas should be cleaned with a wire brush to remove loose scale prior to application of product. For best results, repair material should extend at least three inches beyond edges of the damaged area to ensure continuity of galvanic action and used at temperatures between 60° and 80°F (16° to 27°C). Drying may be accelerated by applying heat.


Notice:
Zinc is a dense material which will settle on the bottom of the container. This product is formulated to resist hard settling (where zinc is dry, clumped together and will not remix). However, soft settling (the zinc sinks to the bottom but remains wet, no clumping, and will remix) is natural for this product and can occur from road vibration during transportation or while sitting on the shelf. Aerosol application: Align spray head with black mark on valve rim to insure complete evacuation of contents. Vigorously shake can for 2 minutes after hearing rattle of agitator ball (ball should release in 10 to 30 seconds), and intermittently (1 to 2 seconds) during use. Apply from a distance of 10 to 12 inches. Spray in light, sweeping strokes to avoid run and sags. The preferred application method is to apply a coating of 3-4 mils, wet thickness in one application. One coat will be satisfactory. A second coat may be applied to maximize the protection (refer to the recoat schedule). Whenever you must set the aerosol can aside for more than 2 minutes or are ready to store the can, then invert the can and spray for two seconds to clear dip tube, valve and tip to prevent zinc from drying in those areas and clogging the can.