Product Name:   Cylinder Pressure Test Table for Whole Vehicle TU-15A
Technical Parameters:
1. Range: 0 --- 1000PSI
2. Accuracy class: 2.5 level
Function Description: Mainly used to determine the engine cylinder compression stroke generated in the maximum pressure.
How it works: This type of instrument consists of two parts: the indicating mechanism and the measuring part. The compressed gas in the cylinder enters the spring tube in the indicating mechanism through the fitting joint， connecting pipe and so on， The dial pointer indicates the pressure value.
Applicable models: Ford， BMW， Mercedes-Benz， Mitsubishi， Citroen， Nissan， Toyota， Peugeot， Renault， Volkswagen， Mazda， Volvo and so on.
Instructions for use:
1. Operate the engine to the normal operating temperature.
2. Remove the relevant nozzle and connect it from the end with a soft connector to direct the fuel to the appropriate container.
3. Secure and seal the appropriate analog syringe and connect the instrument to the analog syringe.
4. Start the crank and turn the engine and test， the instrument will show the cylinder pressure.
5. Redo the test of the same cylinder， according to the pressure relief valve on the instrument decompression.
6. Comparison of the measurement results with the specifications of the engine manufacturer， through the comparison of the pressure readings of each cylinder， can better grasp the state of the valve or piston ring.
Use maintenance and caution:
1. The instrument for the ambient temperature -40 ℃ --- 60 ℃ relative to not more than 90% of the conditions of work.
2. In order to extend the life of the instrument， the working pressure should exceed 75% of the upper limit of the measurement.
3. Instrument in the transport and installation process to prevent collision and extrusion.