TX transmitter acts as a master control unit to the popular

YN-622N ITTL and Remote Manual transceivers， providing more functions and a far more user friendly built-in LCD user interface.

You can use YN-622N-TX and YN-622N Transceiver as Flash Trigger system to fire flash.

YN-622N-TX Features:

1， 3 Groups ( A/B/C)

2， Mix TTL， Remote Manual， and SuperSync Groups

3， Syne mode ( front-curtain syne， rear-curtain sync， Hi-speed sync ( Auto FP ) )

4， Max Sync. Speed: 1/8000s

5， Trigger Interface: Hot shoe， PC

6， Individual 1/3rd stop Manual Power and FEC adjustment

7， Remote Flash Zoom in 3 groups， and Auto Zoom

8， 2nd Curtain Sync， HSS， SuperSync

9， USB port for Firmware Updates

10， AF Assist Light

11， Remote Shutter Release Function

12， Dedicated Buttons for Fast Adjustments

13， Battery Level Indicator

14， 2.5mm shutter release interface ( We have two cables， one is for N1， other is for N3 )

15， PC Interface ( You can buy RF-602 PC/PC to connect it with your camera )

16， 7 Channels

17， Improved Stability and Transmission Speed

18， SuperSync Manual Timing Adjustment by Group

19， Flash Value Lock function (FVL)

20， Modeling Flash & Red-Eye Reduction flash

21， Settings Saved Automatically

22， Up To 100M Range

YN-622N Features:

1. YN 622N iTTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects

can be produced through setting the flash at 360 degrees.

2. It supports i-TTL and manual flash， front-curtain sync， rear- curtain sync and high-speed sync(Auto FP)， the highest sync speed is 1/8000s*.

3. It can remote change flash exposure compensation or flash output of each group， supports different flash modes.

4. Supports the transmitter installed i-TTL flash， in addition， it supports the master unit on transmitter sets the parameters of each group.

5. This product is a wireless transceiver design， the distance of remote control reaches 100M， supporting 7 wireless channels and A/B/C three

groups， and with AF assist beam emitter function.

Function:

*Compatible flash mode: i-TTL， Manual flash

*Compatible Shutter sync: front-curtain sync， rear- curtain sync and high-speed sync(HSS/FP)， the highest sync speed is 1/8000s*

*Support remote set the parameters of flash through the transceiver (Remote Control Mode)

*Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode)

*Support the flash installed on transmitter(on-top flash)and supports i-TTL function

*Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode)

*Support FEC， FVL function

*Support modeling flash and red-eye reduction flash

*Support flash zooming (auto)

*Built-in AF assist beam emitter (AF Lamp)

*Settings saved automatically

*Compatible with YongNuo series flashes

*Support PC port triggering strobe flashes

*PC port support front/rear curtain sync and high-speed sync(Super Sync)function

*Support single-contact of camera & flash triggering (max sync speed is 1/250s)

Compatible Camera:

For Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D5000 D5100 D5200 D5300 D7000 D7100

Compatible Flash: ( You should use it with YN-622N together )

A: ETTL Flash: ( It suport wireless remote control through camera menu )

---Nikon SB-910， SB-900， SB-800， SB-700， SB-600， SB-28， SB-27， SB-26， SB-25， SB-24

---Yongnuo Flashes Nikon version: YN-568EX， YN-565EX， YN-500EX， YN-468II， YN-467II， YN-465

B: Other Flashes: (Not support TTL function or HSS)

---Canon 580EX， 550EX， 540EZ， 430EX， 430EZ， 420EX， 420EZ， 380EX

---Yongnuo YN-560III， YN-560II， YN-560EX， YN-560， YN-460II， YN-460

---Pentax AF-540 FGZ， AF-360 FGZ， AF-400 FT， AF-240 FT

---Sigma EF-500 DG Super， EF-500 DG ST， EF-430