Features
High Performance Instant Heating
Anti-Scalding
Safe & Reliable
Splash Proof to IP25
Economy
Site Requirement
The installation must be in accordance with the local water authorities by-laws. To ensure correct operation of the shower heater, It must be connected to main water supply with a minimum running pressure of 13.8kPa at a flow rate of 3 litres per minute in order to obtain optimum performance. The shower heater can have the water taken from a cold water storage tank but must be an independent supply to the shower heater only. If it is intended to operate the shower in areas where the pressure are below or above the minimum or maximum stated, please contact your Local Authorised Distributor for assistance.
DO NOT USE JOINTING COMPOUNDS ON NY PIPE FITTINGS FOR INSTALLATION
Specifications
Power Rating : 3.3kW
Voltage : 230V
Frequency : 50/60Hz
Min. Water Flow Rate : 3.0Litres / min
Min. Water Pressure : 13.8kPa(2p.s.i.)
Max. Water Pressure : 0.3mPa (43.5p.s.i.)
Water Connection : 15mm diameter (Threaded 1/2" BSP)
Product Dimension : 340mm(Height) , 240mm(Width), 86mm (Depth w/o knob), 96mm (Depth with knob)
Packaging Dimension : 548 x 268 x 112 mm
Country Of Origin : Malaysia
Warranty : 5 years for heating element