MKS SBASE V1.3 Smoothieboard + MKS TFT32 V2.0 Controller Display
Package includs :
MKS SBASE V1.3 X 1
MKS TFT32 V2.0 Display X 1
Cable X 2
What's MKS SBASE ?
MKS SBASE is a latest motherboard for 3D Printer
It is based on ARM platform and uses 32bit 100M Cortex-MS MCU-LPC1768.
Compare to MKS SBASE V1.0 and V1.2 :
1.Fix temperature problem.
2.Add thermocouple Pins( can't be used with 12864lcd together).
3.Create some pins P1.22 P1.23 P2.12 P2.11 P4.28 for further developing.
4.Extend 3.3V / 5V for endstops power.
5.Preassemble two big heatsinks.
Features of MKS SBASE :
1. Using 32bit 100M Cortex-M3 MCU-LPC 1768 and improve its performance highly.
2. Support highly modular open source firmware Smoothieware easy for secondary development.
3. Support network function then proceed remote control via IE Explorer.
4. Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.
5. Currents of the stepper motor can be set directly which can avoid the damage .
6. Using high quality FR-4 4 layers PCB and special design for cooling.
7. Using professional power chip support 12V-24V DC input.
8. Good to work with LCD12864 and MKS TFT touch screen.
(Can't work with OLED12864 and LCD2004 display.)
More info please visit below website:
1.instructables.com/id/Configuring-MKS-Sbase-V12-32-bit-Controller-Basics/
2.instructables.com/id/Smoothieware-Switch-Module-for-Automatic-Fan-Contr/
3.instructables.com/id/Setup-External-Driver-on-Smoothieware-Sbase-12-Con/
4.instructables.com/member/dintid/
5.instructables.com/id/SbaseSmoothieware-Use-a-Free-PWM-Pin-and-Power-Exp/
MKS TFT32 3.2'' LCD Display:
1.3.2 inch colorful touch screen support U disk and SD card.
2.Support continual and easy software update.
3.Support MKS Wifi module.
4.No need to adjust firmware support Marlin Smoothieware and Repetier.
5.Support keeping printing and saving of outage. Also exhausted material detection.
6.Support logo and button customization .
7.Support user define function.
MKS TFT32 Connector
MKS-TFT32 is a colorful touch screen LCD it is suitable for many main board such as MKS BASE MKS GEN MKS MINI MKS SBASE etc.
Don't like MKS TFT28 MKS TFT32 do not support external power supply can’t work with Ramps1.4.
Connect to MKS BASE MKS MINI
Boot Setting
Step1: turn on MKS TFT32 at first time then enter ?> setting ?> connection select baud rate that the firmware use.
Step2: enter ?> setting ?>model choose printer type only Delta and other two options
Others: enter ?> setting ?> touch screen correction improving accuracy.
Firmware Update
Copy the latest update firmware to SD card root directory including:
1. mkstft32.bin.
2. mks_config.txt.
3. mks_pic.
Please do not adjust the file name. Insert SD card it will update automatically after restarts.
WIFI Connection
1. MKS TFT can support MKS WIFI module.
2. After MKS TFT works with MKS WIFI module can use Printrun Repetier-Host to proceed remote connect and control. But it may make some functions unavailable.
mks_config.txt basic configuration
1. Configuration on single and double nozzle : change the value after the colon of “cfg_sprayer_counter” into the nozzle you need.(“1”is single nozzle; “2” is double nozzle )
2. Heated bed configuration: change value after the colon of “cfg_custom_bed_flag” into custom requirements you need.(“1” is with heated bed; “0” is without heat bed)
How to use ?
1. Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb)
Need to change config name .
For example:
Change 
into 
into 
2. Adjust config.txt according to the configuration .
3.Refer to MKS-SBASE PIN make correction connection. Such as stepper motor endstops.
4.Plug the SD card to the board after power on it will automatic update .
5.If connect computer with USB need to install the driver (Refer to below specification ).
Install the Driver
First you should upload the smoothieware-windows-signeddriver.zip and extract.
Then plug the USB to computer . Next enter device manger .
As follow:
Download Firmware and Update
Please upload firmware from our github: github.com/makerbase-mks/ .
Copy configuration (including firmware.bin and config.txt) to SD card insert to the board and power on it will automatic update .
After successful updated the file name will turn into firmware.cur.
Welcome to my shop ! ! !
( If you need more information Please don't hesitate to contact us )
( If you want more quantity Please contact us )
100% Product quality protection
100% On-time shippment protection
100% Payment protection
Tracking info of China Post Ordinary Small Packet Plus can be check here : www.17track.net/en
Please don't open dispute and leave any bad feedback if you have any question
feel free to contact us
we will give you a satisfactory answer ! ! !