Item Descriptions:

Product introduction

"Black pipe adoption" It is inconspicuous in the tank! New standard "Unified standards standard" Newly developed heater for thermostat connection! ● Heater capacity: 100W ● Approximate water tank standard: 45cm or less ● Estimated water capacity: Approximately 40

Usage notes

When unplugging the heater power plug, hold the power plug and do not have the power cord and pull it out.

In case of damage in the water please be sure to unplug the power plug before taking it out.

Protect the power cord so that it can not be scratched if breeding a tooth sharp fish.

Please choose a heater suitable for water capacity.

Do not empty the heater in the air, never throw underwater in the heated state.

The heater cord, cap, kiss rubber of the heater main body are deteriorated in water, become hard, and cause cracking and it is dangerous.

We recommend replacing the heater body with a year as a guide.

This product has no function to lower the water temperature.

Even in a short period of time before the safety circuit works, do not reuse it because the surface processing of the heater section will be damaged if the sky runs out.

Do not use this product in containers other than ornamental fish tanks.

When using this product in a plastic or acrylic water tank other than the glass tank, please arrange so that the heater section does not directly touch the tank.

Please do not use in shallow water tank.

Be sure to set it horizontally when setting a three-heater heater.

Even if water decreases during use, be sure to fix the heater main body with the attached kiss rubber at a position not exposed to the water surface.

Please do not drop or put ornaments for aquarium or rock etc on the heater.

Do not use near flammable ones.

Do not use in places exposed to direct sunlight, vibration, dust etc.

Please do not install in the state where heater body is buried in gravel or covered with heater cover.

Do not apply hot water to the heater body or soak it.

When an ozone generator or a sterilizing lamp is used, it will cause the rubber and resin parts to deteriorate markedly and cause malfunction.

Always circulate the water in the aquarium using an air pump or a filter.

Be sure to check with the water temperature gauge once a day whether the water temperature is appropriate.

Do not use in aquarium containing chemicals other than polluted abnormal water quality water and ornamental fish chemicals not suitable for aquarium breeding.

Use with strong alkaline, strongly acidic water quality may cause all parts to deteriorate markedly and cause failure.

The thermostat is a thermostat that adjusts the water temperature by connecting a heater for the aquarium fish.

Absolutely please do not connect the aquarium cooler or other home appliances.

The thermostat is made of plastic.

If dropped it will crack or damage the built-in machinery, leading to malfunction, so please handle with care.

Never bring anything that generates radio waves or magnetism to this product.

Do not use chemicals such as thinner or detergent when cleaning.

This product is made for breeding ornamental fish.

For other purposes, please never use.

Other stated in the instruction manual.

Show all product descriptions

Features:

• Body size (width X depth X height): 8 × 4 × 26.5 cm
• Body weight: 180 g
• Country of Origin: People's Republic of China

Product information:

Shipping Weight: 185 g

Package Dimensions: 4.39 x 8.20 x 26.59 cm