Product Description

Z-Wave unifies all your home electronics into an integrated wireless network and helps them talk to each other. Any Z-Wave enabled item can be added to the network, and making your home electronics fully compatible. The ZWN-RSM2 Dual Relay Switch Module is a component of lighting control system, it can not be used separately but should turn an existing switch into a Z-Wave switch. This ZWN-RSM2 module is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Once the ZWN-RSM2 module is installed and setup with in your wall, it will re-transmit the RF signal from one device to another until the intended device is reached. This ensures that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. This unit acts as a signal repeater which can extend the range of your Z-Wave network up to 100ft. *NOTE: Honeywell Panel doesn't support two-relay wiring*

Feature

Upgrade Existing Wall Switches into a Z-Wave Switch so you can Still Keep the Original Switch and Wall Plate. The Switch Will Become Controllable Through the Z-Wave Relay and Your Z-Wave Gateway.
Wirelessly Switch your Devices (Lights, Fans) ON / OFF from Smart Phone Applications, Any Web Browser from Any PC or Mac, or Internet Connected Tablet
The ON / OFF Control of the Connected Load can be Programmed into Z-Wave Scenes, with Dynamic Scheduling and Events from Anywhere
The ZWN-RSM2 Acts as a Z-Wave Repeater to Extend the Range of your Z-Wave Signal up to 100ft; The Switch will Still Work if the Module Fails
NEUTRAL WIRING REQUIRED, Single Pole, 120-277 VAC, 50/60Hz, Up to 100ft Range, 20,000mA (20A) Maximum Load (10,000mA | 10A per Load x2), 908.42MHz, Slim Design - Dimensions: 2.02" x 1.71" x 0.82"
Brand : Enerwave
MPN(PartNumber) : ZWN-RSM2
EAN : 0883951415365