DSO138 DIY Digital Oscilloscope Kit 13803K Version Colorful TFT LCD Screen Display
Description:
DSO138 Oscilloscope Kit
is specifically designed for electronic teaching and training. It adopts ARM Cortex-M3 processor and colorful TFT screen
・ and features with simplicity・ reliability・ moderate making difficulty・ high making rate
. People can carry out secondary development on the basis of the suite・ for example・ it can be changed into millivoltmeter・ data loggers and so on.Main Features:
￠ Adjustable vertical displacement and with instructions￠ With automatic・ regular and one-shot mode・ easy to capture the instantaneous waveform￠ Available rising or falling edge trigger￠ Adjustable trigger level position and with instructions￠ Can observe previous trigger waveform (negative delay)￠ Can freeze at any time waveform display (HOLD function)￠ Comes with 1Hz / 3.3V square wave test signal source


Coupling Mode: DC / AC / GND


Model: DSO138
Suitable for: Arduino
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 10mV/Div ・ 5V/Div
Maximum Real Time Sampling Rate: 1 MSPS
Max. Input Voltage: 50Vpp (1:1 Probe); 400Vpp (10:1 Probe)
Input Impedance: 1 Megohm
Sampling Buffer Depth: 1024 Byte
Accuracy : 12Bit


0.320 Package weight: 0.361 kg
Product Size(L x W x H): 13.00 x 8.50 x 3.00 cm / 5.12 x 3.35 x 1.18 inches
Package Size(L x W x H): 14.00 x 9.50 x 4.00 cm / 5.51 x 3.74 x 1.57 inches











Product Safety Disclaimer:

We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys・ knives・ etc.)・ we recommend proper supervision as we cannot be held liable for misuse or accidents.