The most awesome of decorative lamp

Pro - solar wheel decorative lamp

Without destroying the original vehicle power supply， no need for wiring，without removing the wheel installation， need not asked to install，

Do it yourself to save money and time the installation process only needs ten minutes!!

Practical ability is a bit poor friend， can find a repair shop decorationbeauty shop to install!

First， let the sun 8 hours after use.

Product features:

Automatic charging 1 solar energy product， high efficiency solar cells.

2 built-in lithium battery， products with large capacity lithium battery， Abattery， no memory effect， longer life.

3 super bright， ultra bright import chip LED， driving at night with indicatorwarning， decorative effect.

4 intelligent opening function， products using optical and micro vibration sensor system， automatically open the flash driving at night.

5 intelligent close function， the product uses the monolithic integrated circuit， a time delay closing system， in the parking state automatically close after 30 seconds.

Installation is simple， bright lights， please watch the video above

Upgraded version of solar wheel lights / round arc lamp / Hot Wheels /tires lamp

Simple installation super waterproof super durable super gorgeous

Free switch colors monochrome color

Turn can open light to dark and vibration will send a beautiful light

(switch to open， light to dark and vibration will shine)

This product color， the color light， the following is a product of a multi

Color light to shoot pictures!

This definition of R & D products: traffic safety warning lamp. As the nightrain， snow， fog can have prompt warning role， let the car run more safelyin the impact of bad weather. And the effect of unique fashion， as the carsupplies! Recommended to buy

Instructions for use:

In a dark environment， long press the switch button opens in 3 seconds， 3 seconds long closed again.

Mode， long press automatic mode into 3 seconds after the opening，automatic color change， in the open state press a switch to red light，press two to switch the green lighting work， press three to switch to blue light， press the switch to automatic mode again.

Matters needing attention:

Please in the sunshine， charging more than 3 hours 1 before use;

2 regular cleaning products outside， keep the surface clean， in order to ensure the normal work;

3 please tighten all screws， firm installation products， products in thewheels to rotate at high speed will not fall off.

Installation instructions:

1 with a small screwdriver original hub logo removed the word;

2 caliper or common measuring tool numerical diameter card original logoof foot

3 use a screwdriver to loosen clamping foot diameter screws of the product;

4 according to the numerical diameter card foot previously measuredadjusting the diameter， four foot position need to adjust at the same time，four foot center symmetric maintaining product， after finishing the adjustment screw;

5 caliper or common measuring tool measuring height value card original logo of foot;

6 in accordance with the original measured card foot height valuepositioning buckle， a positioning buckle four highly consistent;

7 the spring card in four pin buckle feet inside the middle position， to ensure that the pin elasticity;

8 products will be pressed into the hub of the original logo a;

9 shut out light， press switch for 3 seconds to open the product， the installation is complete