Installation steps:

1. Align the large magnesium alloy pipe with the water injection base, twist the connecting rod under the water injection base and confirm the complete fixation with the upper magnesium alloy pipe.
2. Align the upper magnesium alloy tube with the threaded interface of the lower magnesium alloy tube and rotate it clockwise, and confirm that the upper and lower magnesium aluminum alloy tubes are fully engaged.
3. Turn the device retention clip to the back and unscrew the cleats on the back of the device retention clip completely.
4. Unscrew the device retaining clips into the magnesium alloy rod, magnesium alloy rod alignment device fixed clip interface access.
5. Tighten the tightening clasp on the device clip clockwise to ensure that it is fully secured and does not fall off.
6. Align the threaded ends of the magnesium alloy rod with the magnesium alloy tube. Twist the magnesium alloy rod momentarily and confirm that it is fully tightened.
7. Open the capsule of the injection base, pour enough water along the water inlet, and plug the water plug

compatible with most Tablets,including IPhone 3G/3GS, iPhone 4/5/ 6/6s/6p/7/7p/7s, iPad Mini, iPad air,iPad pro,Galaxy Note Pro and surface Pro 4, etc.
Holder adjustable from 4.5" to 8"
The maximum stretch of 200mm clip can adapt to the market most of the Tablet PC and large-screen mobile phone 

Material：Aviation Aluminum alloy，engineering plastics
Load capacity: 3KG; 
Item Weight:0.73KG;
Base diameter: 35.5CM; 
Maximum height：approx 165CM;