Item Descriptions:

Description:

The chamfer of a single flute edge is 90 degrees.

Wrench with adjustable counter sleeve depth.

The chamfer can use 8 flutes, process can discharge more quickly than wood,

Sink hole disposable drilling smooth, screw cap perfectly embedded surface workpiece.

Drilling length can be adjusted Various length screws Simply loosen and tighten, set screws.

size:

3 mm × 60 mm (length)

4 mm × 75 mm (length)

5 mm × 85 mm (length)

6 mm × 93 mm (length)

7 mm × 100 mm (length)

8 mm × 110 mm (length)

10 mm × 120 mm (length)

Package contents:

7 * countersunk drill bit

1 * L wrench

Features:

• Size: Drill blade 3, 4, 5, 6, 7, 8, 10 mm.
• Material: Three sharp woodwork drills High speed steel 4241, chamfer drill body on the way 45 steel.
• It is suitable for drilling with a chuck for drilling holes in hard wood and wood floors.
• The length of the drill can be adjusted for screws of various lengths only by loosening and tightening the set screw.
• Designed steel counter sleeve counter sink and counter bore pilot hall.
• The depth of the counter sleeve can be adjusted with a wrench.

Product information:

Shipping Weight: 258 g

Package Dimensions: 3.40 x 7.29 x 14.50 cm