Use Tips: Please keep the LED flashlight cooling while using, and the best way is handheld. Turn it off about 2-3 minutes in every 30 minutes. And you must put it in dry place, the attention defends fall off, touch, heat etc.

The Specific Benefits of Flashlight LEDs:

• Energy efficiency
  The light bulbs burn very cool, while incandescent bulbs emit 98 per cent of their energy as heat! Much more bang for the buck
• Long life
  These lights can last from 50,000 to 100,000 hours. Incandescent light bulbs typically last around 1,000 hours and fluorescents are good for roughly 10,000 hours
• Rugged durability
  LED lights have no fragile filament to contend with, and no fragile tube. They are resistant to heat, cold, and shock
• Lumens per watt
  While manufacturers are still finding new ways to increase this ratio, Inc. has been able to produce an LED bulb that generates 131 lumens / watt. This is research, though. Today´s available LEDs are the same as compact florescent bulbs, averaging around 55. Incandescent bulbs wander sadly in at about 15

FEATURES

• Light weight, low power consumption, compact and easy to carry
• It is so portable and lightweight that you can carry it anywhere
• Made of high quality aluminum alloy, it is sturdy enough
• Rhombic knurling surface treatment adds friction
• Use the LED containing three purple chips
• 8-mode design; you are able to select whichever mode you need
• Suitable for indoor or outdoor applications
• The design of spring to avoid scratching battery incidentally

Specifications

Package Includes

• 1 x Flashlight

Extra Info

• If you would like to turn on/off the flashlight, you should press the button into 100% end. And there is a click to be heard.
• If you would like to change the modes, you just need to gently press the button into about 50% end several times. And there is not a click to be heard.

• 1. Please do not irradiate it to human eyes, especially for children, or else, it may cause temporary blindness for the harsh light of flashlights
• 2. Do not meddle with the head of torch or separate the reflector and the bulb
• 3. Wipe flashlight with soft fabric after use
• 4. In case of erosion causing roughness of the torch movements, try to clear and air it
• 5. Silicon grease can be applied to the interface
• 6. Remove battery if not in use for long period
• 7. Strongly suggest using the battery with protecting board, so that it can avoid over-change and over-discharge, and protect battery and prolong its service life
• 8. While using 16340 such kinds of rechargeable lithium battery, you should avoid over-charge and over-discharge, it means that: charge at it once when the light of flashlight remarkably dimmed
• 9. Avoid direct sunlight
• 10. Insert the batteries must be based on the mark to position the positive (+) and negative (-) terminal
• 11. Keep your flashlight in a dry and cool place that is easy to reach in an emergency or power outage
• 12. Please don´t shot the eyes directly, the strong light is harmful to eyes, any contact will cause permanent damage
• 13. Don´t throw the batteries in a fire to prevent leak or rupture
• 14. Please do not recharge the battery unless it has marked "rechargeable"
• 15. To prevent recharging problems, please do not mix old and new batteries or ones with different types