[Product Information]

For GX23 Only, Not for G23, G24d, GX24d which are also 2P. Need BYPASS OR REMOVE the ballast, otherwise, it doesn't light on. Gx23 Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter. GX23 has 2Tab in the central square plastic part. Please make sure your socket is for GX23, NOT G23.
Flame Retardant PBT, Phosphor Bronze.Suit for GX23 socket,Physically change the contact, don't change voltage. If you don't know how to remove or don't plan to ask an electrician to remove the ballast, please DO NOT BUY!
Flame Retardant PBT, Phosphor Bronze.Suit for GX23 socket,Physically change the contact, don't change voltage. If you don't know how to remove or don't plan to ask an electrician to remove the ballast, please DO NOT BUY!
All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.
There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin-based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.