Item Descriptions:

Product introduction

● The ON / OFF state of power can be known at a glance with the LED lamp.

● Easy temperature setting.

Easy operation Adopted large dial.

● Prevent ignition accidents beforehand! Adopt flame retardant resin plug.

● ± 1 ° C accuracy.

High sensitivity sensor adopted.

● Noise proof design to prevent malfunction of equipment.

● 1 year warranty (seawater: 6 months).

Heater capacity 2 W to 300 W.

Control temperature about 19 ℃ ~ 31 ℃.

1 mouth outlet.

Usage notes

Please protect AC 100V (general household power supply) for power supply.

Be sure to use the power outlet supplied with the power thermo for the power supply of the heater.

This product is for indoor use only, please do not use outdoors.

Please do not use power thermo underwater.

Heater is underwater only.

When the heater is in the air, please never plug the power plug into the outlet.

Avoid using children only or in places where infants can reach.

When placing hands underwater, such as when setting this product or cleaning, be sure to unplug the power plugs of all the electric products used in the tank.

Please use the power outlet at a position higher than the tank.

Do not do this with wet hands when plugging the power plug into the outlet or unplugging it from the outlet.

Please do not use it when the power cord and the power plug are damaged or loose insertion into the outlet is loose.

Also, please do not use in the bundled state at the time of shipment.

Please periodically check that the power plug is properly plugged into the outlet and that there is no dirt or dirt on the blade or outlet of the power plug.

When used in a saltwater fish aquarium, please frequently check the salinity and dirt of the power plug or outlet, and wipe it well if it is attached.

If there are any abnormalities such as smoke or smell from the equipment, immediately disconnect the power plug from the outlet and stop using it.

Do not disassemble, repair, or modify this product.

Please do not make the code of this product wiring.

When using, please select a heater suitable for water capacity.

This product is a thermostat which adjusts the water temperature by connecting heater for ornamental fish.

Absolutely please do not connect the aquarium cooler or other home appliances.

This product is plastic.

If dropped it will crack or damage the built-in machinery, leading to malfunction, so please handle with care.

Please place the power thermo in a position higher than the water surface of the aquarium without putting it on the tank top and the light.

Do not use in places exposed to direct sunlight, vibration, dust etc.

Please do not drop or put ornaments and rocks for aquarium on the water temperature sensor.

Never bring anything that generates radio waves or magnetism to this product.

Also, please do not install items using magnets (mainly moss removing magnets) nearby.

Please be sure to install the water temperature sensor in the place where water in the underwater circulates.

When an ozone generator or a sterilizing lamp is used, it will cause the rubber and plastic parts to deteriorate markedly and cause malfunction.

Do not use near flammable ones.

Do not use chemicals such as thinner or detergent when cleaning.

Do not use chemicals such as thinner or detergent when cleaning.

Please clean the water temperature sensor periodically with a brush etc.

This product is made for breeding ornamental fish.

For other purposes, please never use.

When warming from the low water temperature to the temperature suitable for breeding by the power thermo, the power thermo body may become hot, but it is not a malfunction.

Protect the power cord so that it can not be scratched if breeding a tooth sharp fish.

Be sure to check with the water temperature gauge once a day whether the water temperature is appropriate.

Do not use in aquarium containing chemicals other than polluted abnormal water quality water and ornamental fish chemicals not suitable for aquarium breeding.

This product has no function to lower the water temperature.

In the summer season when the water temperature rises, we recommend that you remove the heater from the tank and store it after cleaning the main body and heater.

When unplugging the heater power plug, hold the power plug and do not have the power cord and pull it out.

Do not apply hot water to the water temperature sensor or soak it.

Always circulate the water in the aquarium using an air pump or a filter.

Use with strong alkaline, strongly acidic water quality may cause all parts to deteriorate markedly and cause failure.

Please assemble, install and care of this product safely according to the instructions and description of the instruction manual.

Other stated in the instruction manual.

Show all product descriptions

Features:

• Body size (width X depth x height): 6 × 4 × 28 cm
• Body weight: 230 g
• Country of Origin: People's Republic of China

Product information:

Shipping Weight: 258 g

Package Dimensions: 3.81 x 6.20 x 27.99 cm