Specification:
Dimension:
- 11.5cm x 8.5cm x 5cm with retail box
Directions to use:
- Use gloves if you find skin sensitivity
- For best results,clean and de-grease surfaces,then roughen bond area prior to application .
- Twist or cut off required amount . Smaller amounts of putty used and lower temperatures will lengthen hardening and cure times
- To mix , knead thoroughly with fingers to a uniform color(average mixing time is 2 minutes).A quick way to knead the putty is on a hard,clean surface. If tacky on hand ,wet hand sligtly..
- Apply to surface to be repaired(within two minutes of mixing).
- The mixed epoxy does not exhibit high bond strength at this point but appears tobe merely lying on the surface.
- Force into any cracks or holes to befilled
- strike off excess material .
- On painted surface ,the bond can only be as strong as the paint bond itself
- When applying to damp,wet or slowly leaking area ,work the material forcefully into the surface and apply pressure until adhesion begins to take effect.
- For a smooth appearance of the cured compound ,hand rub with water or a damp cloth prior to hardening .Remove excess material before hardening begins .Once hardening begins , do not handle or reposition
- After 30-40 minutes the epoxy will harden and form a tenacious bond. After just 60 minutes many items are able to be put back into service.
Colour
Package Include:
