Safety Reminding
1 .Please read this manual carefully before using.
2.National standard power cable and power cord with grounding is
suggested, so as to ensure stable power supply.
3.No peeking into the lens while projector is working.
4.No cloth, blanket or any other material that could stock ventilation
holes should be placed around the projector while it is working.
5.No water-prooffunction for this projector, no such apparatus as vase
or cup should be put around the projector.
6.Projector should be stocked and used at dry and clean condition.
7.Please turn offthe projector and cut offthe power supply, ifit is not
used for long time.
8.Please use factory original foam and other shockproofmaterial while
transporting.
9.Iffound projector defected, do not attempt to repair it by yourself.
Please contact with your distributor or factory directly.
Remarks:
User Manual shouldbe read carefully ifyou are using the projector. Ifany difference between
user manual and actual projector. Please subject to the actual projector.
1. Esc 2. Play/pause 3. Left 4. Ok 5. Up 6. Right 7. Indicating light 8. Power button 9. Input 10. Menu 11. Down
12. IR receiver 13 . Earphone/ 3 .5mm Audio-in 14. AV input 15. HDMI input 16. SD card slot 17. 5V out 18. USB input
19. Focus adjusting handle 20. Keystone correction 21. Height adjustment nut 22. Lens 23. Power input(100-240V) 24. VGA Input
1.Input 13.nofunction
2.Play/pause 14.Picturemode
3.Power 15.Return/esc
4.Next 16.Down
5.FF 17.Left
6.OK 18.Up
7.Right 19.FR
8.Zoom 20.Previous
9.Volume+ 21.Menu
10.Volume- 22.Mute
11. no function
12.Info
Do not mix use old and new batteries.
Ifremote is not used for long time,
batteries should be removed.
Remote should target at the IR receiver.
SMP is short for simplified micro projector.
It is one kind ofprojector which has simplified system structure
design, but with multifunction.(Also means easy handling micro projector.) .
This kind ofprojectors use the simplified system to reduce cost
but at the same time supply end users with a projector with simple setting thus can be easily used.
Simplified micro projector usually uses LCD as the image system and LED as light source.
Focus
Put the projector with lens vertical to
the wall or screen, turn on the projector
and then adjust focus adjusting handle
(As showed in6) until the picture is
clear.
Keystone Correction
Ifprojector is not vertically or
horizontally placed, the image will
present trapezoid twist. Keystone
correction technology refers to a kind
normalizing the twisted image via digital or optical technology.
Solution
Rotate the keystone correction nut as
NO.5 showed, until image twistbe
corrected. keystone correction angel is ±15º