Product Description

Description:

This wireless shutter release has strong anti-interference function and has 16 channels for you to choose. It is extremely useful if there are several photographers working nearby. Each photographer could choose their own channel to trigger off the shutter release of the camera they are going to use without triggering others' because of overlapping signals. You also can control more cameras with the channel switches on the transmitter and the receiver， and extra receivers if you need.

Specifications:

Transmitter Power: 12V

Transmitter Battery: 23AE (included)

Transmitter Frequency: 433 MHz

Receiver Power: 3V

Receiver Battery: CR2 (included)

Receiver Frequency: 433 MHz

Suitable for Canon 1D Series， 5D， 5DII， 5DIII ，7D， 10D， 20D， 30D， 40D， 50D

TIPs: How to Connect?

1. Switch off the camera.

2. Make sure the receiver and remote control are on the same channel (check the little switch on them).

3. Connect the receiver to your camera's remote control socket.

4. Press the button on the receiver to turn it on (the Power LED should stay red when it is on).

Notice: If you have to switch the channels， please make sure you have turned off the receiver first.

Package Contents 1x NEEWER Remote Control WIRE & WIRELESS

Feature

Wirelessly Trigger Your Camera's Shutter: With the receiver connected to your camera's remote control socket， you can press the button on the remote control to trigger your camera's shutter wireless.
Two-Level Shutter Button， Autofocus， Continuous Drive & Bulb Mode Supported Too: The shutter button can be pressed halfway or all the way. You can activate autofocus， release shutter， activate continuous drive mode or keep the shutter open for bulb photography as well.
There are 16 channels available so that you can switch to other channels to avoid jamming frequency.
Maximum working distance is about 100 Meters in open area without blockage.
With its low voltage and energy saving design， you don't have to change the battery often. With a new battery， the receiver standby time is about 1000 hours. With a new battery， the remote control can trigger about 20，000 times.
Brand : Neewer
Item model num : 10070274
MPN(PartNumber) : 10070274
EAN : 0884853835725