Package including:
1. 1PCS 20A solar controller

2 1 PCS User\` manual

CMP12 CMP12/24 10A 12V 24V Solar Charge Controller

Only For off-Grid PV Solar System.

For 12V Pv System: 240W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage

For 24V Pv System: 480W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage

Protection:

Overcharging protection

Can be used for all panels

Overdischarging protection

Short and Open Circuit protection

Full specification available if required

Fail Safe and cannot be damaged by accidental wiring mistakes

Advanced design with simple plug and play technology. No need for complicated adjustments

Indicator LED

1.The Battery is being charged strongly when the Charge LED is lighting;Filckering means the battery is in floating charge Mode,if it`s off means charging stopped.

2.When the LOAD LED is lighting,it means there is output and load can work;if it`s off,there isn`t output and the load can`t work.

Introduction:

A solar charge controller is the controlling center of the PV battery in off-grid power system which makes use of solar cells array to protect your batteries from being over-charge and over-discharge, so the life span of it can be extended.

Features:

Functio According to the voltage of battery, Solar charge controller will adjust the charging current and decide if to supply power to the loads.

1. Generally keep the battery on full voltage condition.

2. Prevent the battery from over-charging.

3. Prevent the battery from over-discharging.

4. Prevent the battery from supplying power to solar panels during nights.

Output voltage:12V 24V auto switch

Max load current: 12A

Full charge cut:13.7V

Low voltage cut:10.5V

Temp ompensation:-3mv °C/cell

Zero Load Loses:20mA