A "chocolate"， good mood every day! According to the phone required a flexible combination of electricity， modular design， super magnets automatic adsorption， the U.S. technology rolled into one with the essence of life.

 

 

 

 

 

 

 

 

 

 

 

How to correctly use the mobile power charger

1 ， how to charge the mobile power ?

( 1 ) First， find the logo of a dedicated charging head ， put it in the included universal adapter connected to data lines ， charging head into a mobile power charging port ( round mouth ) ;

( 2 ) then the other end is a standard USB port ， plug in the computer's USB port ， or a USB charger 5V output ( our cell phone chargers are using the USB interface 5V output voltage ， such as Apple cell phone charger ) ， we can give mobile power charging.

 

2 ， mobile power how is considered fully charged it?

(1 ) mobile power generally has three LED lights that charge status indicator. When charging ， LED light flashes ， and according to how much electricity ， gradually increasing from 1-3 lights flashing number . Etc. ， etc. All three LED lights and stop flashing ， it means full .

3 ， mobile power charger to charge for a long time ， not full ? What is the reason ?

( 1 ) The charging time not only with the charger for charging mobile power when the output current ， but also with mobile power used in a battery's capacity . Charger output current is constant ， the higher the mobile power capacity ， the time required to fully charge longer ; Similarly ， mobile power capacity unchanged charger output current is smaller， the time required to fully charge longer .

( 2 ) if directly plugged into the computer's USB port for charging mobile power ， time will be longer， because the computer USB output current is very small .

 

4 ， the number of mobile power to charge the phone how to calculate ? If the phone 's battery capacity is 1500MAH ， 3000MAH mobile power ， is not able to charge two times ( 3000 divided by 1500 ) ?

( 1 ) First， to be clear， this method of calculating the number of charges is wrong ， you can not simply use the power of the battery capacity divided by mobile phone battery capacity.

( 2 ) All -capacity mobile power products identified by means of an internal lithium-ion battery capacity size ， does not mean you move the power to charge the battery can emit capacity.

( 3 ) communication device or digital products， the nominal battery voltage 3.7V， full power is 4.2V， and mobile power built-in lithium ion battery nominal voltage is also 3.7V， full power is 4.2V， the voltage range of mobile power so is not charging the battery directly .

( 4 ) must move through the built-in intelligent power boost circuit ， the built- polymer batteries mobile power voltage to the charging voltage of the external automatic boost charging equipment needed ， typically 4.2V-5V， will boost this process causing part of the loss; coupled with the process of charging circuits and connectors are part of the capacity loss， so mobile power output capacity is no built- polymer batteries capacity so high. Directly simply by dividing the capacity mobile phone battery power capacity to come charging times ， is not correct.

( 5 ) the introduction of mobile power Lizhong life master in the optimized circuit design， the charging loss to a minimum extent ， the optimal conversion efficiency .

 

5， with mobile power to charge my phone ， the phone will not charge the bad ?

Lizhong mobile power is through sophisticated design ， using the ATL polymer batteries and intelligent power management chip ， the output voltage constant current stability ， but also has automatic protection device ， will not cause any damage to mobile phones and other devices.

 

6 ， how to charge the mobile power no response ? Light is not bright ?

If this happens， continue to follow the correct charging method for charging mobile power ， after a while the lamp is lit ， enter the normal state of charge .

 

7 ， why not give my phone to charge ?

Because some phones in the case of original data cable to connect your phone and mobile power supply can not be filled or produce false charge ， if this is the case ， please use our charging data cable distribution on it. If it still does not charge， please contact us aftermarket .

 

8 ， mobile power in the course of fever， normal?

In its own mobile power charging or discharging the external energy is in the conversion process ， there is a slight fever is a normal phenomenon .

Product data:

Brand : Mrice ( rice )

Model : Chocolate

Color: blue / red / silver / black / chocolate

Battery capacity: 3000 mA

Battery voltage: Input -5V-1A

          Output -5V-1A

Input Interface : Micro USB

Output Interface : USB

Indicator: 3 LED power indicator

Product Dimensions : 9.1 * 6.45 * 1.7cm

Packing list: chocolate body * 1

          Power superimposed block * 2

          Manual * 1

          Warranty card * 1

          Micro USB cable * 1

Package Size : 4.6 * 9.6 * 14.5cm

Product Weight: 303 grams

Weight : 164 g ( body +2 overlay block )