4x1 3G/HD/SD SDI Selector distributor

: Digital Forecast Bridge 1000_SDA

• Select one input from SDI4 input, 4 output distribution
• 1 Selected source to 4 HD-SDI out ( SD/HD/3G )
• Equalizer reclocking function Built-in
• RS422, RS232 remote control support
• Wide range of input voltages corresponding (DC7 ~ 24V)

Introduction

1000_SDA is SDI selector distributor of multi-rate compatible with 4 terminals each equipped with SDI input and output. By selecting one of the buttons on the main unit SDI input to be distributed output, it becomes possible to simultaneously output to multiple devices of the same SDI signal. This is useful when you want to simultaneous output to four monitors that were placed in separate rooms, the camera image of the four that were installed on site. SDI format corresponds to the multi-rate of SD / HD / 3G-SDI that complies with the SMPTE standard, it also supports DVB-ASI signal. 
 In addition, by using a built-in equalizer reclocking function, to remove jitter by restoring the signal attenuation occurring during the transmission, it enables long-distance transmission of up to 100m up to 60m, in the HD-SDI with 3G-SDI. * 1) 
 Supports remote control in RS422, RS232. It is possible to connect the switcher, such as PC and console 1000SDA in cable, switch the SDI input by sending a serial signal from a remote location. * 2) 
 Input voltage is compatible with a wide range of DC7 ~ 24V, to an AC adapter other than the supplied, power supply from a variety of equipment is available.

Features

1 Select the input from 4 input SDI, and 4 output distribution

1000SDA can be selected by the button SDI input source that you want to output, and then distributing and output to four SDI source. SDI format, supports multi-rate of SD / HD / 3G-SDI that complies with the SMPTE standard.In addition, I also supports DVB-ASI signal.

Equalizer reclocking function built-in

Built-in equalizer reclocking function. Restore the signal attenuated during transmission, and outputs by removing the (deviation of the signal) jitter. It is possible to long-distance transmission of up to 100m up to 60m, in the HD-SDI in 3G-SDI. * 1)

Support a wide range of input voltages to (DC7 ~ 24V)

power supply input voltage corresponding extensively and DC7 ~ 24V. Power supply from the various devices is possible to the AC adapter other than the one provided.

RS422, RS232 remote control corresponding

To correspond to the remote control by RS232 and RS422. 1000SDA will perform the operation control of 1000SDA from a remote location.

input and output corresponding format

Application

Body appearance

Components

• Supports multi-rate SDI formats
• SMPTE 125M: NTSC (480i 59.94), PAL (576i 50)
• SMPTE 296M: 720p (60/59.94/50)
• SMPTE-274M,SMPTE-292M
  - 1080i (60/59.94/50)
  - 1080p (30/29.97/25/24/23.98)
• SMPTE-424M: 1080p (60/59.94) 3G