This signal repeater booster could Work with 850MHz 2G 3G Band 5 network frequency
This signal booster could improves the voice quality and faster 2G 3G in your house,office,villa,garage,basement and so on
It is better to determine the exact in different location until the highest signal strength is received on your phone(most amount of bars). Once you ascertain the best location then permanently mount the outdoor antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work
It is very easy to install
FCC Certificate

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 8 inch
Height : 3.6 inch
Length : 16.2 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B01M7X4EI5

Product Description

1.Before order please make sure your mobile frequency is 850MHz Band 5 in your area.
2.The outdoor yagi antenna should receive 2-3 bars of stable signal in the location where the outdoor antenna is fixed in,or the booster couldn''t work very well.

Operation Frequency:Band 5
Operation Frequency:824-849MHz(Uplink),869-894(Downlink)
Emission Designator:CDMA(F9W)
AGC LEVEL:Uplink:-44.00 Downlink:-57.00
Max.Antenna Gain:Uplink:7.9dBi Downlink:6.6dBi
FCC Classification:B2W/Wideband Consumer Booster(CMRS)
FCC Part 20.21

Packing:
Signal Repeater Booster
Outdoor Directional Yagi Antenna
Indoor Omnidirectional Whip Antenna
32ft 5D-FB OD7.5 Coaxial Cable
Mounting Screw Kit
English User Manual

Installation Guide:
1.Tightly connect the 32ft coaxial cable to the Outdoor Yagi Antenna
2.Check and find a place where your cell phone can receive the best signal outside your house,and keep the outdoor yagi antenna towards the cell phone signal tower
3.Mount the repeater device somewhere inside the house,the repeater should be mounted in a place where is near from the power socket, and have good ventilation.
4.Tightly connect the 32ft coaxial cable to the OUTDOOR port of the repeater
5.Tightly connect the indoor whip antenna on the INDOOR port of the repeater