The most awesome of decorative lamp

Night vision gear - solar wheel decorative lamp

Without destroying the original vehicle power supply no need for wiringwithout removing the wheel installation need not asked to install

Do it yourself to save money and time the installation process only needs ten minutes!!

Practical ability is a bit poor friend do not worry

Price is a price of a car is recommended to buy the 4 set

Product features:

Automatic charging 1 solar energy product high efficiency solar cells.

2 built-in lithium battery products with large capacity lithium battery, Abattery, no memory effect longer life.

3 super bright, ultra bright import chip LED driving at night with indicatorwarning decorative effect.

4 intelligent opening function products using optical and micro vibration sensor system automatically open the flash driving at night.

5 intelligent close function the product uses the monolithic integrated circuit, a time delay closing system in the parking state automatically close after 30 seconds.

This product can choose a variety of colors color light red light greenlight blue light equivalent to spend a money to buy the four products, the following is a product of a variety of colors of light to shoot pictures!

 

使用说明:

  1. 在光线较暗的环境下,长按开关按钮3秒后开启,再次长按3秒关闭。
  2. 模式选择,长按3秒开启后进入自动模式,颜色自动变幻,在开启的状态下按一下开关转为红色灯光工作,按二下开关转为绿色灯光工作,按三下开关转为蓝色灯光工作,再次按下开关转为自动模式。

注意事项:

1.使用前请在阳光下充电3小时以上;

2.经常清理产品外部,保持表面整洁,以保证产品正常工作;

3.请拧紧各个螺丝,牢固安装产品,以免产品在轮子高速转动时不会脱落。

 

安装说明:

1.用小一字螺丝刀把原轮毂车标取出

2.用卡尺或普通测量工具测量出原车标的卡脚直径数值

螺丝刀将本产品的卡脚直径定位螺丝松开;

照原先测量的卡脚直径数值调节好所需要的直径,四个脚位需要同时调节,保持产品的四个脚位中心对称,调节完成后拧紧螺丝;

5.用卡尺或普通测量工具测量出原车标的卡脚高度数值;

照原先测量出的卡脚高度数值安装定位扣,四个定位扣保持高度一致;

产品压进轮毂原车标位