Finger Pulse Oximeter,SPO2 Monitor,Pulse Rate,Blood Oxygen Saturation,Heart Rate Monitor,CMS50N

Model:CMS50N Blue Color

Major Features

Principle of the CMS50N Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse  Scanning & Recording Technology,the Pulse Oximeter can be used in  measuring the pulse oxygen saturation and pulse rate through finger.The  product is suitable for being used in family, hospital, oxygen bar,  community healthcare,physical care in sports (It can be used before or  after doing sports, and it is not recommended to use the device during  the process of having sport) and etc.

Major Features

◆ Integrated with SpO2 probe and processing display module

◆ Small in volume、light in weight and convenient in carrying

◆ Operation of the product is simple ,low power consumption

◆ SpO2 value display

◆ Pulse rate value display, bar graph display

◆ Pulse waveform display

◆ The display mode can be changed

◆ Screen brightness can be changed

◆ Low-voltage indication: low-voltage indicator appears before working abnormally which    is due to low-voltage

◆ Automatically power off function: when the device is under the state of measuring interface.it will automatically power off within 5 seconds  if the finger falls out of probe.

◆ Display format can be saved after power off

Main performance

◆ Display Mode：0.96" Dual-color OLED display(blue and yellow)

◆ Screen Resolution：128*64

◆ SpO2 Measuring Range：0%～100%, (the resolution is 1%).

◆ Accuracy：70%～100%：±2% ,Below 70% unspecified.

◆ PR Measuring Range：30bpm～250bpm, (the resolution is 1bpm)

◆ Accuracy：±2bpm or ±2% (select larger)

◆ Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown    correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse  rate error is ±2 bpm    or ±2% (select larger).

◆ Resistance to  surrounding light: The deviation between the value measured in the              condition of man-made light or indoor natural light and that of  darkroom is less tha ±1%

◆ Power Consumption：less than 30mA

◆ Voltage: DC 2.6V~3.6V

◆ Power Supply:1.5V (AAA size) alkaline batteries × 2   

◆ Battery working hour: Theoretical number is 32 hours.

◆ Safety Type:Interior Battery，BF Type

Accessories

◆ a hanging rope

◆ a user manual

◆a Main Unit

Physical Identity

◆Dimension:57(L) × 31(W) × 32(H) mm

◆Weight:About 50g