Studio : Hilway Direct

Publisher : Hilway Direct

Binding : Kitchen

Product Description
Initial application directions: Sweep then damp mop floor. Thoroughly clean floor or remove existing finish (factory or site applied). Rinse and neutralize floor with clean water. Do not let stripper solution dry on floor. Shake Hilway Direct plus vigorously for 30 seconds then let it settle for 5 minutes. Apply undiluted in a thin, even coat using a microfiber applicator mop. Apply 2-3 coats. Allow each coat to air dry completely (generally 30-60 minutes) before applying next coat. Allow floor surface to dry overnight before heavy traffic use. Initial application coverage, single coat (undiluted): 350 square feet/ liter, 1500 ? 2000 square feet/ 1.33 gallons. Coverage may vary depending on porosity of flooring material. Daily cleaning, mop bucket directions: Sweep floor. Dilute 1 oz. of Hilway Direct plus per 1 gallon warm water. Mop floor with solution using a 2-bucket system. Pick up soil and excess solution with a clean, tightly wrung out mop. No rinsing required. Allow to air dry. Daily cleaning, auto scrubbing machine directions: Dilute 1 oz. of Hilway Direct plus per 1 gallon warm water. Scrub floor with solution. Trail mop excessive wet areas behind scrubber. No rinsing required. Allow floor to air dry. Caution: Eye irritant. Avoid contact with skin and eyes. Do not taste or swallow. In case of contact with eyes or skin flush with plenty of water. If irritation develops, seek medical attention. In case of ingestion, flush mouth with water, drink large quantities of water and seek immediate medical attention, do not induce vomiting. Keep out of reach of children. Note: Avoid solution contact with sensitive surfaces such as wood, metal, furnishings. When applying finish, avoid strong sunlight and drafts. Turn off under floor heat prior to application. Read full msds (available for download) and product label prior to use.
0