NOW we have a All-in-One Product
GPS - Tracker
MODEL : V40 (3G Model)
Product Specifications:
- Advanced sealed waterproof and dust proof (IP66)
- Intelligent light LED Marquee
- 4 frequency GSM global general
- Global unlimited distance GPS positioning
- WiFi high precision indoor positioning technology (no password required)
- Intelligent WiFi anti lost (accuracy is 200 times higher than the LBS, not limited by the GPS satellite signal)
- Remote voice monitoring
- Historical track playback
- GPS+WIFI electronic fence
- Low power automatically to the owner of the phone to remind
- Web /APP/ WeChat and other platforms operating support
Product specifications:
- GSM band: 850/900/1800/1900MHz
- GPRS standard: Class 12, TCP/IP
- GPS positioning time: cold start 30sec (open sky), warm start 29sec (open sky), hot start 5sec (open sky)
- GPS positioning accuracy: 10-15 meters (open sky)
- WiFi positioning accuracy: 0-30 meters (with WiFi signal coverage)
- Working temperature: -20 degrees C ~ +45
- Working humidity: 5% ~ 95% RH
- Product size: 47 (long) X50 (wide) x15 (high) mm
- Product net weight: 40 grams
- Battery capacity: 400mA
Prepare for work :
Please choose GSM network-based Micro-SIM card (same as Iphone4) for the product. And please note :
a. Please be sure the tracker is turn off before insert or
take out the Micro-SIM.
b. Please be sure the GPRS data plan and Caller id has been activated.
Operating instructions:
Power on /off :
1. Please insert the Micro-SIM card into the card slot as
directed.
2. Press the POWER key for 3-5sec, then the tracker will light on.Blue and Red
3. In the state of power-on ,press power button for 3 times ,the front of blue and red lights lit simultaneously for about 10sec , then power off at the same time ,the success of the shutdown.
Indicator light show:
1. GPS indicator and GSM indicator:
Light color:Blue,Red
Function:GPS indicator,GSM indicator
Slow flash:GPS searching,GSM searching
Fast flash:GPS success,GSM success
Close:GPS sleeping,GSM sleeping
2. The smart rolling LED light with four tri-colors : when the environment gets dark, open LED flash automatically, easier to see about the activity status of wearer.
APP banding and function setting:
1. Scan the user manual cover QR code to install the APP.
2. Enter the 10 figures ID number on the tags behind the device.The default password is 123456,click log in,and enter into App, as shown below:
**********************************************************************
Ready to be used in Singapore and Asia
tested with LOCAL Singapore Telcos.
Suggestion to use a TOP-UP SIM Card (only pay when used)
