Package Content:
1 x 18650 Charger - LII / 500...
1 x 12V 2A suits (US / EU)
1 x Car Charger
1 x tracking number
A warnin
1. This charger can only charge and Cylindrical lithium-ion batteries， Nickel Metal Hydride batteries， Lithium Iron phosphate batteries are not Rechargeable.
2. Before use， carefully read the instructions， Pay attention to the recommendation of the Rechargeable Battery Charging Current， do not exceed the recommended charging current;
3. Do not use another Power Adapter;
4. Download Chargers can be hot， be careful not to burn;
5. Stop use， Disconnect the Power， the Elimination of the battery;
6. It can only be used in the normal room.
7. This product Test Data for reference only， please refer to Professional Team.
Secondly， characteristics
1.4 types of LOAD CURRENT regulator (300mA / 500mA / 700mA / 1000Ma);
2. Can different specifications (18650 / 26650...... / AA / AAA) in the battery charger;
3. The Charger to prevent the use of a separate indication of LCD screen， the Voltage (V) current (MA) time (H) capacity (MAH) resistance (MR) parameters， and look...
Under 4. Load Mode， Channel 4 Work independently， you can select different charging current for charging and hunchong lithium-ion Batteries and Nickel Metal Hydride batteries.
Under 5. Mode of Rapid Test， 4 Channels can quickly detect the battery capacity， regardless of the lithium-ion Batteries and nickel Hydrogen batteries， are working independently. Rapid Detection of battery Capacity (1 Download process， 2) by two steps
6. Neither Test mode， the battery capacity is normally detected by the process of Three Steps (1 Load First， then Recharge Discharge 2 and 3)， the Detection process of the battery capacity;
. 7. Charge and / or Rapid Test 3 test modes can work simultaneously; Independent Set Load / capacity Rapid Detection / Detection of the normal capacity;
8. A variety of protection functions: overcharge and over Discharge， Short Circuit， temperature， 0 V Voltage Activation function (Delta - Delta V and 0 V)， 1.65 V - 2.2 V cannot load Recognition， Intelligent Battery Detection in poor condition and reverse Battery Protection.
9. With the standard 5V / 1000ma usb output: 1 to 4 Lithium Batteries Lithium Batteries USB OUTPUT has been completed， the product can not be Nickel - metal hydride Battery with USB OUTPUT.
10. With a dedicated Power Adapter: DC Input Voltage: 12V / 2a.
Thirdly， the description of the keys
1. The shipper has six buttons， Key selection mode， the current Selection Key (Black)， and see the Data independently selected key (1234)， the use of simple and convenient;
2. Press the mode key in any case and hold for 3 seconds to switch the load (Load) or the mode of Rapid Test， or Test (Test of capacity)， then again for the Function Keys can be changed in 8 seconds， the current， Independent， hunchong， Capacity test， the selected function after 8 Seconds in The Working State， the working conditions can play (1234) key to see the current (MA) / capacity (MAH) / Voltage (V) / Time (H) / Resistance (MR) Reference Data.
Fourthly， the description:
Load (Load mode)
1. When the power is connected to Charger， the Charger all Instant full brightness LCD screen， if the battery is not placed in the screen is null， if a Bad battery is also displayed in the void;
2. Insert the batteries Power Charger， the Charger in three seconds or less to measure the internal Resistance of the battery， after which the system automatically enters into Charge Mode， the Charger automatically (Load) current is 500mA load default "， in 8 seconds within the current Selection Key (Black) select 300mA， 500mA LOAD CURRENT 700mA Current 1000ma， locking system you select will be loaded in eight seconds， IF within 8 seconds， did not set， the system automatically by default 500mA LOAD CURRENT， current and other functions at this time will not be changed， if it is necessary to change need to change the mode button press since the election;
3. In the mode of loading (Loading)， within 8 seconds to change any Independent load or different current Selection， as well as different hunchong Battery. Do a simple 8 seconds， press the corresponding button Battery 1234， press the mode button to change the mode， press the key to the change of current， Independent， hunchong Detection function， capacity， Selected after 8 Seconds in the State of work
