This is the most refined model of water purifier and is latest model by Cleansui. Designed by a famous Japanese designer, it has a sleek look with silicon on the front and side imprinted with the words 'Cleansui'.

This water purifier uses LED screen that is only lit when you are running purified water through the purifier so as to conserve energy.

 

3-lever: Purifed water, shower or tap water

CSP801 comes with the lever for the purified water, tap water-shower feature and stream function on the left side of the faucet. When you turn it, you can choose to

a. wash dishes with the tap water - shower feature so that that saves water.

b. use the tap water - stream function to fill bottles of water for washing the car or watering the plants

c. use the purified water for cooking, drinking and washing vegetables/ fruits.

This 3-lever is a common feature across many of Cleansui's faucet range.

 

When to change the cartridge?

There are 2 indicators for you to tell you when to change your cartridge.

1. New: The flow rate indicator with green (above image) showing a good flow rate, and orange (below image) showing a low flow rate.

2. Standard: The Countdown indicator starts counting down from 900 litres as that is the optimum number of litres of water puririfed. Once you start using the water purifier, the Countdown will start. In the above image, you would have used 810 litres of water, leaving 90 litres. The flow rate indicator also shows orange, indicating a low flow rate.

When to change: When you see the orange (below image) light up or when you see the countdown go to 0, whichever is earlier.