FY-41AP-M is an inertial attitude measurement instrument used for FPV flight on Multicopters. It has an integrated OSD video overlay
system that presents critical flight information such as power management, airspeed, altitude, and flight direction via its electronic
compass, allowing for a clear visual flight while ensuring key information is within sight.
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor.
This enables the module to accurately measure flight attitude, earth azimuth & relative altitude.

Features：
GCS Ground Station Software
OSD Video Overlay System Function
Navigation Flight Mode (Way Points: 20)
Four mode：Camera Gimbal Stabilization, Auto Return To Home Mode, Hovering Mode, Attitude Stabilized Mode.

Specification:
Supported Multi-rotors: Quadcopter I4, X4 / Hexacopter I6, X6, IY6, Y6/Octocopter I8, X8
Supported ESC output: 400Hz refresh frequency
Recommended Transmitter: PCM or 2.4GHz with minimum 6 channels
FY-41AP Module Working Voltage: 5.3V@0.2A( Powered by Power Manager)
Power Manager:
Working Voltage Range: Power of battery 7~26V (2S ~ 6S)
Measuring current:0 ~25A ( If you need larger range of measurement please declareto custom-make)
Power for FY-41AP-M module: 5.3V/2A
Power for Video transmission system : 2V/2A
Operating Temperature: -10°C ~ 50°C
Assistant Software System Requirement: Windows XP sp3 / Windows 7 / Windows 8

Flight Performance:
Max Yaw Angular Velocity:150°/s
Max Tilt Angle:35°
Ascent / Descent: -1.5m/s ~ +3m/s

Flight Performance:
Max Yaw Angular Velocity:150°/s
Max Tilt Angle:35°
Ascent / Descent: -1.5m/s ~ +3m/s

Package Information:
Package size: 13 * 9 * 6cm / 5.2 * 3.6 * 2.4in
Package weight: 292g / 10.3oz
Brand Gift Metal package

Package List:
1 * FY-41AP-M Autopilot
1 * GPS
1 * Power manager
1 * Updating Firmware Connection Diagram
2 * Cable Connector
1 * T Plug
3 * Hook & Loop Tapes