Wireless DMX512 LED light Controller Transmitter Receiver PCB Modules Board<br />Input voltage: 5V DC<br />Work frequency section: 2.4 GHz ISM band・ 126 channels frequency section<br />Max transmitting power rate: 20 dBm<br />Receiver sensitive: -94 dBm<br />Signal port: RS485 or CPU series port AURT.<br />ID code and LED color corresponding correlation:<br />1:RED<br />2:GREEN<br />3:RED+GREEN = YELLOW<br />4:BLUE<br />5:RED+BLUE = PURPLE<br />6:GREEN+BLUE = CYAN<br />7:RED+GREEN+BLUE = WHITE<br />Press key 1 time to indicate ID setting・ Press again to set IC・ then ID value adding 1 each time by press.<br />Working condition:<br />LED constant light up: no DMX or wireless signal.<br />Red LED flash: transmitting.<br />Green LED flash: Receiving<br />RF frequency--2. 400-2. 525 G・ total 126 channels・ it is searching automatically.<br />ID Code---"1-7" groups ID code・ press "key" button for setting・ it only can work under same ID code of transmitter and receiver.<br />Establishing Communication:<br />Power on DMX512 wireless received board and transmitted board.<br />Press "key" button to set same ID value of transmitted board and received board・ please use different ID value if you need use more than 1 group wireless net at same time in same place.<br />The red LED flashes when transmitter transmits DMX data by no interfered frequency section・ then receiver changes communicated frequency section. <br />Green LED flash till received corrected same ID value・ LED flash faster once DMX data faster.<br />Package include:1 * Wireless DMX512 PCB Modules Board LED Controller Transmitter Receiver<br />