????

Note that use of the process:

 

Two vehicles can not have any contact， two car electronic systems need to have the same voltage.

If the battery is frozen， you can not use the battery started to take the line of fire.

Before connecting， two car engine， stereo， air conditioning are required to turn off.

Connection procedure is as follows:

(1) First， start in the "rescued car" red battery cathode wire clamp on the red line.

Red wire clamp (2) and the other end of the "rescue vehicle" on the red battery cathode.

(3) the black wire clamp in the "rescued car" black negative battery.

(4) Then the black wire clamp in the "rescue vehicle" black negative battery.

(5) Start the "rescue vehicle" of the engine， and then start the "rescued car" engine. If it is found rescued car still does not start， check the metal contact part is bad.

After the completion of the engine start， still take the line of fire to start in order to remove， or they may cause a short circuit.

Wire removal procedure is as follows:

(1) First， the "rescued car" black wire lowered.

(2) then "rescue vehicle" black wire lowered.

(3) Except under then "rescue vehicle" red wire.

(4) Finally， the "rescued car" red wire lowered.