Studio : redder Publisher : redder Product Description
Electronic parameter: 1. Power bank requirements: 7.4V/1.2A 2. Power bank type: Lithium-ion or lithium polymer Power Bank, (recommend using MITM power bank 2600mah) 3. Temperature control: 4 modes 4. Working time temperature(Tested by MITM powerbank 2600mah fully charged） 5. Heating Zones: Palm, back, and fingers 6. ESD: The glove is made of anti-static fleece lining. The heating components all works under DC low voltage and the heating element is completely covered by anti-static silicone. 7. Certifications: battery FCC/CE/ROHS certificated Working process: 8. Plug the powerbank into the USB port located at the back waist pocket. 9. Press power button to choose different heating Mode. Press power button once for 25% heating Mode. 10. Press power button twice to switch to 50% heating Mode. 11. Press power button three times to switch to 75% heating Mode. 12. Press power button four times to switch to 100% heating Mode. 13. Unplug the power bank and recharge when necessary. 14. You can wash the glove just as a normal glove. Please remove battery and heating chips and refer to washing label. Warning: 1. A quality power bank required for the Thermal-Electric Glove. The output voltage of the power bank has to meet or exceed 7.4V and with at least an output current of 1.2A. 2. The circuitry will test the power bank at upon start-up. If it finds that the power bank current is not enough, it will stop working to protect your power bank. 3. Washing instruction: Remove battery and heating chips before washing. Hand wash and Machine washable. Do not Dry-clean 4. The Thermal-Electric Glove is intended to be powered by the power bank. It is prohibited to plug the USB port into any other power supply other than the power bank. Warranty: 1 year guarantee
0
|
