RAMPS 1.4 CONTROLLER BOARD

About

RAMPS 1.4 (RepRap Arduino Mega Pololu Shield) is the most popular 3D printer controller used today. Interfacing with an Arduino MEGA2560, it expands the Arduino platform to provide all the necessary features for a 3D Printer. Additional expansion boards can be added on top of the RAMPS 1.4 to further increase its functionality, these include SD card readers, LCD adaptors & fan extenders.

Our standard RAMPS 1.4 offers excellent value money, and will still get the job done without any issues. Priced much lower than our premium option, it won't break the bank if you damage it, a perfect choice for newcomers to the world of building 3D Printers.

Features

- Interfaces with Arduino MEGA2560.
- Room for additional expansion boards.
- Up to 5 independent stepper motor driver outputs, 3 Axis + 2 Extruders, with dual motor driven Z-Axis.
- Compatible with Pololu A4988 and DRV8825 stepper drivers and others.
- 6 Limit switch inputs.
- 3 Thermistor inputs.
- 3 PWM MOSFET's outputs, 2 x 5A resettable fused (Extruder's or Fans), 1 x 11A resettable fused (Heated Bed).
- I2C and SPI outputs
- LCD Screen can be connected.
- Additional connections available for servos, fans extenders etc.
- Fully tested after assembly.

Options

Use the drop down options above to build your perfect RAMPS 1.4 Stack for your 3D printer. These options are explained below.

- Arduino: Option of an Arduino MEGA2560 or Taurino Power. The Taurino Power should be chosen if you plan to power your printer with a voltage higher than 12V.

- Stepper Drivers: Either A4988 or DRV8825 Stepper Drivers. A4988 are sufficent for NEMA17 stepper motors, and DRV8825 for NEMA23 stepper motors. Heatsinks with adhesive pads are included.

- No. Stepper Drivers: 4 stepper motor drivers are needed for a 3 axis machine with 1 extruder. 5 drivers are needed for a dual extruder setup.

Feature:

Fully assembled and tested

Stable performance

3D Printer controller board

Ramps 1.4 for Reprap Mendel Prusa

With rules of Cartesian coordinate robot and extruder

Could control spare parts

With heater/fan output/three thermistor MOSFET

Integrated 5A extra safety and components protection

Suit for 5 Pololu stepper driver plate

Pololu plate pin socket

I2C/SPI pin for future development

All MOSFET with PWM pins

Product Specifications:

Model No: RAMPS 1.4

Model Type: 3D Printer Control Board

Suitable driver plate :5 Pololu stepper driver plate

Size:100 mm * 60 mm






Package includes:

1 x 3D Printer Control Board Printer Control for RAMPS 1.4 Reprap Mendel Prusa