Features:
- Made of high quality material
- Exquisite box package
- A complete set of accessories
Material: plastic + metal
Package size: about 13 x 7 x 2.4 cm
Fuse material: zinc
Specification:
10pcs 5A orange
10pcs 7.5A brown
10pcs 10A red
10pcs 15A blue
10pcs 20A yellow
10pcs 30A green
Accessory included:
1 x Red puller (can pull out the burned fuse when replacing fuse)
1 x Test clip with LED light (you can use this fuse test clip to determine which fuse is burned according to the ON/OFF status of the LED light)
1 x ACS power taking device (can use the electrical wire to connect to the blue part on their own to take power)
Note: Make sure the car fuse is consistent to the fuse on pictures.
Check and replace:
If any electrical equipment does not work during use, it may be caused by a burned fuse which requires timely replacement.
Method:
1. Turn off the ignition switch, open the fuse box cover.
2. Replace the fuse.
Note:
1. Replace the fuse in accordance with the required rated current indicated on the fuse box cover, do not use fuses with current higher than the rated current.
2. If the new fuse immediately burns again, then it indicates there is something wrong with the circuit system, you should overhaul soon.
3. In the absence of spare fuses, you can replace it with a fuse which has no effect on driving and safety on other devices in emergency.
4. If you can not find the fuse with the same current load, you can use fuse with current low than the rated current of the original fuse to replace.
1 x Car Test Clip Fuse Set (60 x Fuse, 1 x Puller, 1 x Test Clip, 1 x ACS Power Taking Device)
In plastic package