?????

Product Name: Benks AR Nokia protective film best film temptation (set)

Nokia N82 protective film comprises (five pieces): screen and keyboard + Flash + cover (upper and lower two parts)

Materials: the original Japanese AR material

Packing: hanging environmentally sealed packaging

AR full transparency (transmittance of >98%

N82 protective film comprises (five pieces): screen and keyboard + Flash +cover (upper and lower two parts)

The characteristics of the commodity:

The last five layer optical AR film， no rainbow lines， anti glare， anti radiation，protect eyesight， the sun than other protective film shows more clear， andthe sun to use in the field of navigation to solve many problems; screen display enhanced sharpness! These are the other three layers without the addition of AR materials protection film do not， sealed packaging， quality assurance， strongly recommended!

The surface hardening treatment of the latest 3.8-4H optical AR film super abrasion， effectively prevent screen scratches.

Transmittance of 98% without the rainbow lines， anti glare

Five layer optical AR membrane in the sun than other protective film shows more clearly

The only protect vision optical film!

Strong electrostatic adsorption force than common protective filmadsorption capacity is more efficient，

Full sealed packaging， 100% authentic guaranteed

Experience of Benks AR anti reflection series

Benks AR anti reflective series features

1 super wear resistance

2 easy adsorption

3 can clearly display screen light image sharpening

As shown in fig.:

↑: strong sunlight， general LCD screen imaging effect will become veryfuzzy， it is difficult to see the LCD screen display effect.

↑: LCD screen attached to Benks AR protector in the sunlight， reflected light layer of blue stones， also protect the eyes and vision of your.

↑: Benks AR protector even in strong sunlight， also can enhance the display effect

Protective film sticking method:

When the 1 stick to with a clean cloth to clean the screen， note: don't on the screen a small articles such as dust and hair (or film will be bubbles)， not all of a sudden the protection to touch two flap (i.e. don't tear film protective film， so you are tearing) not good in the hand to the screen printing paste，easy to use the fingerprint and the dust absorption.

2， paste the face recognition: the crystal of high transparent type protectorconsists of three layers， the bottom film labeled "step1" label， the surface islabeled "Step2" from the film， the total thickness is 0.23-0.25mm， use onlythe middle layer， whose thickness is 0.12-0.13mm.

3， pull the protector film (step1) of about one centimeter (please note， is beginning a CM please do not tear， side stick pulling) in addition， when the tear， fingers don't and protection paste paste surface contact， so as not to leave any fingerprints. Please avoid finger touch protection glued veneer， to avoid the dust adsorption effect of electrostatic adsorption. Align the edge of the screen aligned， a paste side will protect the bottom film out slowly，posted at the same time as the slow and confirm the attached well， avoiding bubbles. Confirm the protector completely adhesion， no bubbles， can will protect the mounting membrane (Step2) removal (PS:step1 the surfacebelow)

4 open "Step2". Paste after check， if the bubble is still available screen cloth gently press. The shop pasted although protection can be used repeatedly，repeatedly washed， but the best one， don't tear reposting.

N81 (three pieces): the main screen + camera + cover

N82 (five pieces): screen and keyboard + Flash + cover (upper and lower two parts)