1 x EVA board 1 x Transparent plate 6 x O-shape magnets 4 x Rubber rings 1 x Refill
Insert 4 magnets into the grooves prepared on EVA board; Make sure the magnetic poles are same; Two magnets in the same groove should keep certain distance (8~10mm); Insert the transparent plate into another groove after inserting the magnets;
Put the magnets around the refill and fix the magnets with rubber rings; Make sure the magnets on the refill have the same magnetic pole as the ones on EVA board; So the magnetic suspension kit is finished; If the refill can not suspend， just adjust the distance between every 3 magnets until it suspends.
Dimensions: 5.12 in x 2.36 in x 0.55 in (13.0 cm x 6.0 cm x 1.4 cm) Weight: 0.92 oz (26 g)