L298N is a dedicated driver ICs belonging to H-bridge IC, the output current is 2A, maximum current 4A, the maximum operating voltage of 50V, can drive inductive loads<br />Easily controlled by the microcontroller<br />You can achieve the motor forward and reverse<br />This module has a small, convenient control features<br />This module can control two-phase, three-phase motors, four phases. Supports 2-way DC motor control, 4-phase stepper motor control.<br />Product parameters:<br /><br />     1. Drive chip: L298N dual H-bridge DC motor driver chip<br /><br />     2. Drive portion of the terminal supply area Vs: + 5V ~ + 30V; such as the need to take power within the board, the supply area Vs: + 6V ~ + 30V<br /><br />     3. Drive section peak current Io: 2A<br /><br />     The logical part of the operating current range: 0 ~ 36mA<br /><br />     5. Control signal input voltage range (IN1 IN2 IN3 IN4):<br />       Low: -0.3V≤Vin≤1.5V<br />       High: 2.3V≤Vin≤Vss<br /><br />     6. Enable signal input voltage range (ENA ENB):<br />       Low: -0.3≤Vin≤1.5V (control signal is invalid)<br />       High: 2.3V≤Vin≤Vss (control signal active)<br /><br />     7 .. Maximum power consumption: 20W (when the temperature T = 75 ℃)<br /><br />     8. Storage temperature: -25 ℃ ~ + 130 ℃<br /><br />     9. The drive plate size: 90 * 54 * 28mm<br /><br />     10. Other expansion: control direction indicator, take electrical interface within the logic portion of the plate.<br /><br />L298N V3 drive module * 1<br />Static bag<br /><img src="http://img6.eachbuyer.com/x9/p100/eb4363_1.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/eb4363_2.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/eb4363_3.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/eb4363_4.jpg" />