EnPoweR 100 was road tested on a new Mercedes E200 taxi that had been operating for several months. Before the addition of EnPoweR 100, a sample of the engine motor oil (D1) was sent to SGS for analysis. One bottle (50ml) of EnPoweR 100 was then added to the motor oil and the Mercedes taxi continued operating. At the next motor oil change, the second sample of used motor oil (D2) with EnPoweR added was sent to the SGS again for analysis. SGS tested both motor oil samples for TBN (Total Base Number) ASTM D2896 and spectral analysis for metals ASTM D5185. TBN is a measure of a lubricant’s reserve alkalinity and it determines how effective the control of acids formed will be during the combustion process. The higher the TBN, the more effective it is in suspending wear-causing contaminants and reducing the corrosive effects of acids over an extended period of time. In the average engine oil, the starting TBN is usually around 6 to 9, however if we are looking to extended drain interval oils, we need to increase the initial TBN so we don’t allow the reserve to be depleted before the oil is drained. Once the TBN level gets below 3, it is a signal to change the oil. According to the SGS report, the D1 sample had a TBN level of 3.09 which was close to the oil change limit. However, after addition of EnPoweR, the D2 sample TBN level was tested at 3.30 indicating that EnPoweR had not only stopped the depletion of reserve alkalinity in the engine oil but had actually increased it! This is how EnPoweR can protect your engine and engine components. Additionally, the D2 oil sample show a significant 9.8% reduction in the presence of trace iron elements. This indicates that less wear is occuring in the engine components as a result of the increased protection offered by EnPoweR.

Pour the entire contents into the lubricating oil of engines, compressors, pumps and especially motor vehicle engines (gasoline or diesel). No oil change is necessary. Shake well before pouring. For best results, add EnPoweR immediately after your car service or at least 2000km before the next service.

Frequently Asked Questions

Q. Which engines types can Enpower be used in?

A. Enpower engine oil additive can be used for both gasoline and diesel engines.

Q. Do I need to reuse Enpower after an oil change?

A. Yes, after servicing your engine, pour another bottle of Enpower into your engine oil compartment to maintain your engine’s performance and fuel economy.

Q. Is Enpower safe to use in my car?

A. Yes, Enpower has been extensively tested in many types of motor vehicles, including Audi, VW, BMW, Mercedes, Toyota and Honda. It has even been tested in diesel powered taxis plying Singapore’s congested roads.

Disclaimer:
The EnPoweR individual road test was performed on a VW Golf 1.4 TSI over a period of about a year being driven on Singapore roads. The car was serviced regularly and EnPoweR Engine Additive was added after every service. Your actual fuel economy improvements may vary according to driving habits and state of car maintenance.

Notice to Customers

You are strongly encouraged to use Qxpress courier to prevent the lost of items in transit. We will not be liable in the event of a lost items shipped by Singpost normal mail as we cannot trace and track your mail and there will not be any replacement or refund.

We seek your kind understanding.

		Increase Horsepower Enpower Engine Oil Additive Maximizes Your Vehicles’ Horsepower and Torque
		Lower Engine Vibration Get smoother engine performance and less noise and vibration
		Reduces Wear & Tear Prolong your engine lifespan and lower maintenance costs
		Better Fuel Economy Get dramatic improvements in fuel economy