Overview:

PL310K is professional 3-axis zoom gimbal, with high accuracy encoder FOC solution, mount 10x optical zoom and 4K Full HD camera, providing a detailed long distance zoom aerial shoot, is designed for public security，fire protection, power industry etc.
 

Spec:

• Light: 540g weight
• Small: 137(L) x 90(W) x 135(H)mm
• Power saving: 330mA@12V
• Unparalleled stabilization: ±0.02°

Electronic properties:

Voltage	3s （11.1v）	IDDQ	330mA@12V
IDDT	450mA @12V	Temp	-10~+50 °C
Dimensions	137(L)x90(W)x135(H)mm	Weight	540g

Performance：

Pitch: -90°to +90°

Roll: -85°to +85°

Yaw: -150°to +150°smooth rotation

Angular Vibration Range: Pitch & Roll: 0.02° Yaw: 0.03°

Camera Spec:

• f=4.7-47mm
• 10x optical zoom
• Sony1/2.3 inch image sensor CMOS with 16000000 Pixel
• Video Resolution: 4K@25FPS, 2.7K@30FPS, 1080P@60FPS, 720P@120FPS, Video Format MJPG
• Photo Resolution: 4608*3456 with 16000000 Pixel, Photo Format JPG
• Support 64G SD Card video & photo storage
• Micro HDMI output 1080P@60FPS

 

Gimbal:

• Adjustable speed and mode: When zoomed in, with low speed and lock head mode,the control is more accurate; when zoomed out, with high speed and follow mode, the control is more sensitive and quick.
• Onekey reset: The camera can auto return to its original position quickly with one click.
• Support PWM and serial port command control,suitable for close range controller or remote digital gimbal control.

 

Camera

 

1. 10x optical zoom, 4K video steaming, stunning clearly plate within only 200M.
2. Ultrafast auto focus, which speed is less than 1s, specially designed for drones.
3. Various interfaces, video output, HDMI HD video output,SD card storage for photo、video, PWM control of camera zoom 、auto focus、manual focus、photograph、recording, support serial port control of the camera`s functions,IR controller call camera menu and set the parameters.

 

PWM control gimbal camera connection manual:

1. 5P gimbal PWM control wire manual:

 Connect to receiver stick or three-way switch channel.

1p Dupont green(GND Power the receiver)、black( 5V channel)、red(PITCH   3p Dupont orange( channel):

Connect to receiver stick or three-way switch channel.YAW   receiver ) 

1p Dupont blue( MODE Switch operate mode ):

Connect to receiver rotary knob or non-auto reset THR channel or three-way switch channel, specifics as below: 

Switch to low: Gimbal low speed, lock head( When the drone turns, gimbal follows, only controlled by controller);  

Switch to middle: Gimbal high speed, follow( Gimbal follows the drone`s direction, and controlled by ground controller)  

Switch to high: Gimbal reset, follow( Gimbal return to its original position, and follows the drone`s direction).

 

2. 7P camera signal and control wire connection manual:

 1p Dupont blue(ZOOM Camera zoom control wire,spare wire[Spare usually, if uses, Connect to receiver stick or three-way switch channel.]).

 2p Dupont yellow(AV  signal output)、green(GND video GND):Connect to AV channel.

 1p Dupont green(zoom Auto focus control wire): Connect to receiver stick or three-way switch channel.

1p Dupont yellow(focus Manual focus control wire): Connect to receiver stick or three-way switch channel.

1p Dupont white(pic Switch photo/video mode): Connect to three-way switch channel

Switch from middle to high: Photo or video mode switch

 Switch from middle to low:

① Video mode: Screenshot;

② Photo mode: Take photos.

2p Dupont blue(record Start/stop recording), black(GND):Connect to three-way switch channel.

 ① Video mode, switch from middle to high: Start recording; Switch from middle to low: Stop recording;

 ② Photo mode, switch from middle to high: Take photos.
​
​

​
​​